Products

0.4mm Genuine FlashForge Nozzle - M7 Thread for MK10 Extruder $13.59 ex GST

This is a genuine nozzle from FlashForge. M7 tread. They have a step and are wider than many of the other nozzles we stock to aid in heat transfer from the heater block Also fits a variety of MK10 extruders. Specifications: Hole- 0.4mm hole Thread - M7, 5mm long Total Length - 13mm Head Width - 9mm Base - Tapered at screw/thread end Tip - Pointed Filament Size - suitable for 1.75mm filament Material - Brass Is is compatible with: FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Flashforge Finder Flashforge Guider, Guider2 - NOTE: FlashForge Guider2S with the high-temp hotend (red duct) has a different nozzle. See ptNozzle04FFAM Dremel Idea Builder PowerSpec 3D Pro PowerSpec 3D X Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Monoprice Maker Select 3D Printer v2 Cocoon Create 3D Printer NOT COMPATIBLE WITH: Old ply wood Flashforge creator (they use a MK8, or 0.4 standard nozzle)Dimensions: 9 x 9 x 13mm

0.4mm Nozzle - M7 Thread for MK10 Extruders - Wear Resistant Twin Clad Coating $27.23 ex GST

This wear resistant nozzle by Micro Swiss suits a range of printers has an M7 thread and 0.4mm hole. It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it an excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Aluminium or Carbon Fibre filament. TwinClad XT is a nickel composite coating for very low friction. Over a 360 brass base, it gives a lower coefficient of friction than PTFE (Teflon) over nickel.This nozzle is used on MK10 extruders. Designed to work with machines with a PTFE tube lined barrel running into the nozzle. ALWAYS run preheat before changing nozzles to avoid stripped threads. Is is compatible with: FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Flashforge Finder Flashforge Guider Dremel Idea Builder PowerSpec 3D Pro PowerSpec 3D X Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Monoprice Maker Select 3D Printer v2 Cocoon Create 3D Printer Specs Hole - 0.4mm hole.Thread - M7, 5mm LongTotal Length - 13mm.Head width - 9mmBase - Flat at screw/thread endTip - may have a slight flattened areaFilament Size - suitable for 1.75mm filament.Dimensions - 12 x 8 x 8mm

0.6mm Nozzle - M7 Thread for MK10 Extruder - TwinClad Coating $27.23 ex GST

This wear resistant nozzle by Micro Swiss suits a range of printers with an M7 thread and 0.6mm hole. It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Aluminium or Carbon Fibre filament.TwinClad XT is a nickel composite coating for very low friction. Over a 360 brass base, it gives a lower coefficient of friction than PTFE (Teflon) over nickelThis nozzle is used on MK10 extruders. Designed to work with machines with a PTFE tube lined barrel running into the nozzle ALWAYS run preheat before changing nozzles to avoid stripped threads. Is is compatible with: FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Dremel Idea Builder PowerSpec 3D Pro PowerSpec 3D X Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Monoprice Maker Select 3D Printer v2 Cocoon Create 3D Printer Specifications: Hole - 0.6mm hole.Thread - M7, 4mm long.Total Length - 13mm.Head width - 9mm (for better heat retention)Base - Flat at screw/thread end (click photo under more info page for details).Tip - may have a slight flattened area.Filament Size - suitable for 1.75mm filament.Coating - TwinClad CoatedDimensions - : 13 x 9 x 9mm

Adhesive Copper Tape 5mm x 10m $6.95 ex GST

Copper Tape with Adhesive Backing Solderable Repair printed circuit boards Create antennas and shielding

Alligator Clips Pack $7.95 ex GST

Pack of 10 Alligator Clips for use with MaKey MaKey. 40cm Alligator clip leads in 5 assorted Colours.

Ball Bearing MF-85-zz 5x8x2.5. fits Guider 2 corner belt mounts (set of 4) $14.55 ex GST

Thin, flanged Roller Bearing with metal shields used in Guider 2 (not 2s which uses 105zz) corner belt assembly (with flange but or without) 5x8x2.5mm Flanged Bearings, with Metal Shield.Plaig Bearings are a stronger, more reliable bearing with greater heat resistance and superior life to standard factory bearings. Inner Diameter: 5mmOuter Diameter: 8mmWidth: 2.5mmDimensions: 5x8x2.5

Conductive Varnish $14.95 ex GST

This silver conductive varnish adheres well to glass, PCB material, ceramics etc. It is usually used to repairs printed circuits, window antennas, window alarm loops etc. Very good conducting properties and great for use with MaKey MaKey - Approximately 0.02 - 0.1 ohms/cm2.

FlashForge AD1 - Sign Lettering 3D Printer $7,271.82 ex GST

Part of the FlashForge Professional range, this 3D Printer is designed to be a complete solution for printing Light Channels for Signage The special slicing & designing software, FlashAD, makes it easier to make complex designs, you can even create an amazing shadow effect with returned slant at some angles as you wish, eliminating the trouble of calculating the curving angle in CNC machining. Strongly helps you to fabricate complicated logos easily.NOTE: This machine is designed for commercial use only. It comes on an oversized pallet in a wooden crate. You will have to carefully turn it on its side to get it through a standard doorway. Thankfully the crate is sturdy and the machine is bolted inside. Features- Resume printing after power outage- Filament detetion- Screensaver function- Printed file identification (turns green in file list)Printing- Single Nozzle, 2 filament colours (2in / 1 out)- Build Volume: 600 x 600 x 70mm- Layer Heights 0.2 - 0.4mm- Print Resolution: ± 0.5mm or 0.2%- Print Speed: 10-80mm/s- Nozzle Diameter: 0.6mm - Maximum Nozzle Temperature: 260°C- Heated Build Plate: to 100°C- Leveling: 8 point, manual- Material: A-PLA recommendedMachine- 4.5 Inch Touchscreen- 8Gb Onboard Memory- Power: 220VAC, 47-63Hz, 1500W- Machine Weight: 50.2kg- Machine Size: 1170x975x485mmCommunication- Software: FlashAD - Windows 32bit and 64bit- Data Transmission: USB Drive, Ethernet, FlashCloud. Note: No WiFi.- File Output: GFZ- File Input Types: FAD, STL, NC, CDRDimensions: 1070 x 975 x 485mm

FlashForge Creator 3 - v2 $3,635.45 ex GST

The Flashforge Creator 3 Independent Dual Extruder 3D Printer is the latest upgraded version of the world-famous Flashforge Creator Pro. With the new high-temperature extruders and independent dual extruder design, this printer can print with a wide range of materials and handle more challenging print jobs. Version 2 Improvements More ventilation slots on the extruder Optimised nozzle structure Improved nozzle sensitivity Flexible spring sheet platform locked in place with magnets Universal filament holder to fit third party materials Key Features Independent dual extruder (IDEX): the two independent print heads can move separately or mirror print 2 models at the same time. New high-temperature extruder (up to 300℃): enables Creator 3 to print with a wide range of materials including PLA, ABS, PETG, Nylon, PVA and Polycarbonate. Closed metal frame: to maintain an optimal ambient temperature during print. Removable heated print bed: allows the Creator 3 to print demanding materials like ABS or Nylon filaments. Built-in HD camera: to check printing status anytime, anywhere. Filament detection: print stops when filament runs out. Specifications Build Volume: 300mm x 250mm x 200mm Device Size: 647mm x 485mm x 615mm Extruder: Independant Dual Extruder (IDEX) Nozzle Diameter: 0.4mm Positioning Accuracy: X/Y Axis 0.011mm | Z Axis 0.0025mm Layer Height: 0.05mm ~ 0.4mm Maximum Nozzle Temperature: 300 ℃ Maximum Heatbed Temperature: 120 ℃ Net Weight: 40kg Print Technology: Fused Filament Fabrication (FFF) Touch Screen Size: 4.5 inch Color IPS Touch Screen Supported Materials: PLA/ ABS/ TPU/ PVA/ HIPS/ PETG/ WPC/ Nylon Filament Diameter: 1.75mm Connectivity: USB Stick / WiFi / Ethernet / 3D Cloud Operating System: Win XP / Vista / 7 / 8 /10 / Mac OS / Linux File Types: Input - 3MF/ STL/ OBJ/ FPP/ BMP/ PNG/ JPG/ JPEGOutput - GX / G AC Input: 100V-240VAC, 47-63Hz Power: 500W Warranty: 12 Months excludes wear and tear parts

FlashForge Creator Pro2 with IDEX $1,180.91 ex GST

The Flashforge Creator Pro 2 is the latest upgrade of the Creator Pro. The Creator Pro 2 is equipped with an IDEX (Independent Dual Extruder) system which enables the printer to do mirror prints and also improves the quality of dual-colour or dual-material prints. Key Features Support PLA, Pearl PLA, PVA, ABS, ABS Pro, HIPS Support mirror printing mode, duplicate printing mode, and soluble printing mode Fully enclosed design Touch screen control Metal framework Anti-scrape design to prevent oozing issues Self-developed software FlashPrint Specifications Build Volume: 200 L X 148 W X 150 H mm Layer Resolution: 0.1-0.4 mm Maximum Print Temperature: 240℃ Extruder Quantity: Two Print Speed: 10-100 mm/s

FlashForge Guider 2-S (v2 - 2020 Model) $2,409.09 ex GST

This 2020 update to a solid large printer adds a flexible bed, toughen filament drive gear, toughened nozzle (included in the spare parts pack and not fitted) and improved filter. It has a user friendly touchscreen and webcam, plus a generous 280 x 250 x 300mm build volume. All machines come standard with high-temperature extruders (to 300deg). 2020 Upgrade includes unfitted items: Magnetic self-adhesive pad, flexible steel plate, 2 sheets of build tape. Nozzle and gear kit with the hardened filament drive gear and 0.4mm nozzle, Brass 0.3, 0.4, 0.6 and 0.8mm nozzles, allen key and nozzle spanner. The Guider 2s follows the tradition of FlashForge printers in offering an affordable, easy-to-use printer. The building volume of 280 x 250 x 300 mm is one of the largest, while the closed chamber keeps the heat in improving performance with ABS, Nylon and other materials. The printer has filament run-out detection and power failure recovery. The Flashprint software offers advanced features including internal and external dimension adjustment allowing accurate part dimensions after printing. Features Innovative Extruder System – completely encased air supply system to elevate printing smoothness Heated Build Plate – supports multiple mainstream filament types for diverse printing needs Touch Screen – Guider IIs is equipped with a 5-inch full-colour touch screen and multilingual user interface. Built-in Air Filter HD Camera to monitor the print any time Specifications Nozzle Diameter (mm) 0.4 mm Build Volume W x D x H (mm) 280 x 250 x 300 mm Printing Technology FFF Proprietary filament Yes, also compatible with others Filament Diameter (mm) 1.75 mm Material type PLA / ABS / Flexible Heated Bed Yes Build Plate Glass with Buildtak Layer Thickness (microns) 50 - 350 microns Platform Levelling Assisted Connectivity USB, WiFi, Ethernet Slicing Software Flashprint, Slic3r, Cura File Input Format STL, OBJ Power Supply 100-240 V, 50-60 Hz, 500 W Software Compatibility Windows 7, Mac OS X XY Positioning Accuracy 11 microns Warranty 12 months

FlashForge Guider 2-S with MicroSwiss Hot End $2,604.55 ex GST

This edition has the Microswiss Upgraded pre fitted and is ready to print materials from PLA through to abrasive materials like carbon fibre. The 2018 update to a solid large printer adds power-out resumption and an air filter to reduce particle emissions to its user friendly touchscreen and webcam, plus a generous 280 x 250 x 300mm build volume. The Guider 2s follows the tradition of FlashForge printers in offering an affordable, easy-to-use printer. The building volume of 280 x 250 x 300 mm is one of the largest, while the closed chamber keeps the heat in improving performance with ABS, Nylon and other materials. The printer has filament run-out detection and power failure recovery. The Flashprint software offers advanced features including internal and external dimension adjustment allowing accurate part dimensions after printing. Features Innovative Extruder System – completely encased air supply system to elevate printing smoothness Heated Build Plate – supports multiple mainstream filament types for diverse printing needs Touch Screen – Guider IIs is equipped with a 5-inch full-colour touch screen and multilingual user interface. Built-in Air Filter HD Camera to monitor the print any time Specifications Nozzle Diameter (mm) 0.4 mm Build Volume W x D x H (mm) 280 x 250 x 300 mm Printing Technology FFF Proprietary filament Yes, also compatible with others Filament Diameter (mm) 1.75 mm Material type PLA / ABS / Flexible Heated Bed Yes Build Plate Glass with Buildtak Layer Thickness (microns) 50 - 350 microns Platform Levelling Assisted Connectivity USB, WiFi, Ethernet Slicing Software Flashprint, Slic3r, Cura File Input Format STL, OBJ Power Supply 100-240 V, 50-60 Hz, 500 W Software Compatibility Windows 7, Mac OS X XY Positioning Accuracy 11 microns Warranty 12 months

FlashForge Hunter - Resin Printer $4,636.36 ex GST

This high quality resin printer is designed for applications where very high resolution is essential, such as jewelry and dentistry. Build size is 120 x 67.5 x 150mm Print Technology: DLP 5 inch Touchscreen Build Size: 120 x 67.5 x 150mm Print Precision: ± 0.05mm Pixel Size X, Y: 0.0625mm (62.5microns) Light Source: 405nm LED, FHD 1080p resolution with 50,000 hours lifespan Layer Thickness: 0.05 / 0.025 / 0.0125mm (50 / 25 / 12.5 microns) Speed: 10mm/h (vertical) Vat Type: Aluminium with replaceable FEP film Processor Type: Dual-core 800MHz ARM Machine Size: 360 x 310 x 565mm Machine Weight: 17.8kg Power Input: 100-240V, 50-60Hz, 1A Connection: USB Flash Drive, USB Cable or WiFi Software: FlashPrint. Free download for Win XP-10, Mac OS, Linux File Input Format: .stl Dimensions: 360 x 310 x 565mmFormat: 3D Printer

FlashForge Inventor 1 $1,436.36 ex GST

This 2017 upgrade to the trusty Dreamer adds an onboard camera and greater build height to the twin extruder, heated bed and fully enclosed features. Onboard Webcam Build size of 230 x 150 x 160mm (W x D x H) + Twin Extruder Heated bed (so prints most common FDM materials, PLA, ABS and much more) 3.5 Inch Touchscreen for ease of operation Fully enclosed with temperature sensor and extraction fans to keep your printing chamber at a consistent temperature WiFi for peer-to-peer or network connection Pause and Auto Restart feature allows the printer to continue if power is cut mid-print without starting over again Layer Height: 0.05-0.4mm, 50-400 microns Print Accuracy: +-0.1mm Positioning Accuracy: Z: 0.0025mm, X & Y 0.011mm Filament Diameter: 1.75mm Nozzle Diameter: 0.4mm Printing Speed: 30-200mm/s AC Input: 100-240VAC, 2.5-4.5Amps Machine Weight: 10.7kg Connectivity: USB Cable, USB Stick, WiFi FlashPrint Software (free on SD card or by download) Supported File Formats: 3MF/STL/OBJ/FPP/BMP/PNG/JPG/JPEG; GX/G Operating Systems: Win XP/Vista/7/8/10, Mac OS, Linux In The Box Dimensions: 485x400x335mmFormat: Machine

FlashForge Inventor 2 - Bilby 3D Special Edition $1,245.00 ex GST

This is a special Edition of the FlashForge Inventor 2 is the product of a collaboration between Bilby 3D, Flashforge, and Microswiss that upgrades the Inventor 2 to meet the demands of the Education environment, with significantly decreased maintenance requirement and easy use. In addition it is ready for almost any material straight out of the box including Metal filaments. The Inventor II- Special Edition - Smart, Reliable and Safe Desktop 3D Printer designed specifically for educational use and low maintenance This machine is a very special collaborative Edition that unites the expertise of Bilby 3D, Flashforge and Microswiss to provide an edition of the Inventor 2s (which has been our most popular educational model for good reason) to even better cater for the Australian Education sector and small business demands. About this collaboration Bilby 3D, born from Bilby Publishing, brings over 20 years experience in the education sector to this project; together with the wish lists of many education department and Australian businesses. Drawing on this experience, and long standing relationships with FlashForge and Microswiss, Bilby 3D was able to unit the three companies in a single project -the Inventor 2 SE. This machine includes all the Australian safety and compliance items, and raises the bar well above any other machine on the market to include features like Hepa and Carbon filtration to deal with not just micro particles, but also VOC emissions for a completely safe environment. It also has rapid cooling if the door is open to make child burns almost impossible. With the help of Microswiss this machine also incorporates a tough and near maintenance free 3D printer extruder system ready to print even the most abrasive materials like stainless steel. Designed for Tough Materials The machine comes with the amazing Micro-Swiss hot end that can handle abrasive materials as strong as Steel and Carbon Fibre as though they PLA; giving you the power to produce amazingly high quality plastic parts; flexible runners, and even Brass, Bronze, Copper, Steel and Carbon-fibre parts straight out of the box. Tested on the entire Proto-pasta metal and blended material range and designed specifically to handle them all, this little machine holds a lot of power under its hood. Designed for Low Maintenance Maintenance is unaffordable down time in any workplace or school, so we designed this machine to be tough, and need nearly no maintenance at all. Tough Nozzle: The extruder upgrade also means that your are getting a Tough Coat nozzle precision machined by Micro-Swiss that testing has proven to last more than a year in the average school. Silicon coated Heater Block: Say good bye to ever having to change the ceramic tape again. Sturdy Bed System: Means once set up you near never need worry about levelling or adjustments Slide out Glass bed with Flexi steel top and strong print tape: The tough glass bed is fully encased to there is no risk of it breaking. the casing slides out like a drawer, making print removal safe and easy. In addition that glass has a strong magnetic coating with a flexible steel plate on top, that snaps on and off and is flexible, bending to pop prints off the bed. In Combination tape will receive less accidental damage from print removal, and be more long wearing. Just soapy water to wash it occasionally and you are off and printing for up to 300 prints per sheet of tape. Add extra beds to the package so that you can start the next print before removing the last. Designed for Safety and Monitoring Camera monitoring: We also added a Camera for monitoring the machine remotely- great for teachers on the run. It is also Polar 3D enabled, so you can control a lab of machines via cloud management with ease (Note - Polar 3D requires a seperate subscription fee) Filament Monitoring: Sensor auto detects and pauses prints if filament runs out OHS Safety: Door Windows and Hood: All new additions in this model; and combine to completely enclose and finger-proof this machine. The door also has has a sensor that can pause prints & instantly cool the nozzle (turn this on or off in the LCD menu) Full surround nozzle with rapid cooling: The nozzle has a full surround making it almost impossible to get burnt. The door pause feature also activates nozzle cooling, lowers bed and sets hot end to back of machine - to further reduce risk of burning to inquisitive fingers. Designed for Practicality and Quality Soooooooooo Quiet!We measure it at about 22dB. To put that in perspective the Makerbot is 62dB. Making it much more practical for a classroom or office. Especially when you are running a bank of machines at once. Professional ResolutionThis machines print quality is astounding, with very fine detail and quality at up to 50 micron resolution. It is not as incredible at overhangs as the Guider 2, but still far superior to its rivals. Connection and CommunicationLarge colour LCD touch screen makes communication simple, with print thumbnails in the menu, which is lovely. You can print files via: USB drive USB cable to your PC (Mac, Win or Linux) WiFi Basic stats 150 x 140 x 140 mm build size Single High Quality Extruder FlashPrint Slicer Software All Flashforge printers use FlashPrint as their slicer; an amazing piece of software that lets you do things no one else can; and it is free with all Flashforge machines. You can use Simplify 3D, but we would recommend you the FlashPrint software that comes with the machine. It is far superior to any other slice we have used and here are a few reasons: Tree Support (All Flashforge printers can do this) If you are not familiar with tree support it is an amazing step forward in support material. It is automatically generated and allow you to print much more complex models, snapping off supports easily by hand without damaging your objects. If you have a dual extruder you can print support with the second extruder if you want. 2D to 3D - make models instantly from images The 2D into 3D featured in FlashPrint allows you to convert 2D image files into 3D models. This is one of the easiest ways to start 3D designing. All you need to do is to drag image and select parameters you want. Crop on the Fly Cut and split big models into parts or make the base of a model flat. You can cut on an axis or a mouse drawn angle. Advanced Features inc. Dimensional Accuracy Adjustment The FlashPrint software has a basic and expert mode. In expert mode you can control almost every variable and make dimensional adjustments, especially handy when using high shrinkage filaments. . Specifications WHATS IN THE BOX?600g PLA Filament (white),Print Tape and flexible Steel plate (already fitted),AU Power Supply and Cable,USB Cable,Tools: Allen Keys, Small screw driver, sachet of lubricant for rods, a nozzle clearing tool.BED SPECIFICATIONSBuild size: 150 x 140 x 140mmHeated Bed: NOSlide out/Removable: YesBed surface: Glass with Magnetic surfaceBuild plate: Flexi steel coated in Flashforge tape (a consumable)Levelling: Assisted - sensors ring a tone to help with bed leveling through screw adjustments. PRINT QUALITYExtruders: SingleResolution/Layer Height: 50-500micronsPosition Precision: (XY)11 microns, (Z)2.5MicronsSupport: Automatic and custom. Tree or LinearNozzle: 0.4mm Comes with a MicroSwiss Tough Coat hard wearing nozzleFILAMENTDiameter: 1.75mmMaterial: PLA, Bilby 3D Wood, Bilby 3D Flex, Bilby 3D Copper.....the list goes on. Can print heavy metals and abrasive filaments, and Flexibles with easeFilament run-out detection: Yes, when using the spool drawer. Can also run larger spools on external spool stand.INTERACTIONInterface: Touch ScreenConnectivity: 2.4 Ghz WIFI, USB stick, USB cableSoftware: FlashprintFile Type: STL,OBJOperating System: Windows 7/8/Vista; Mac OS X, LinuxPHYSICAL SIZEMachine Size: 420 x 440 x 430mmWeight: 20kgShipping Size (Box): 500 Sq mm, 28kgAC Input: 115-230V, 50-60 Hz, 150wDimensions: 420x440x430mm (570mm with hood)Format: Machine

FlashForge UV Curing Cabinet $999.00 ex GST

Harden your resin prints with this UV Curing cabinet by FlashForge With a Curing Chamber volume of 203mm diameter, 139mm high, this is big enough for the prints from many SLA and DLP printers up to 500g. You can monitor and set the curing temperature from 35-60°C, with a fan to circulate the air and ensure an even temperature during curing. You can set the curing time from 0-300minutes, with normal or strong light exposure.It beeps on completion of the curing cycle, with cut-outs if the door is opened UV Wavelength: 405nm Curing Volume: 203mm diameter, 139mm high. Overall dimensions: 399x266x225mm Net Weight:L 9.9kg Power Input: 100-240V AC, 4.5-2A Rotational Speed: 2.5rpm Power: 326W Dimensions: 399x266x225mm

Getting Started with littleBits $36.32 ex GST

This book is your comprehensive guide to littleBits. With dozens of curated inventions to supplement the Bit explanations, it’s perfect for beginners, educators, and anyone who wants to dive deeper into the littleBits platform and learn how to use each individual Bit.

Hover:bit for micro:bit $206.10 ex GST

Hover:bit is a hovercraft kit for the BBC micro:bit which you build, code and then drift drive. Note: micro:bits are not included in this kit. Hover:Bit combines the micro:bits ease of use with the excitement of a drift driving Hovercraft! It is the world's first ever developed micro:bit hovercraft, combining the relevant skills for mastering the future of technology. It is a STEAM learning kit, which will engage students with a more practical and creative way of learning. It is fully repairable and withstands a lot of crashes. Hover:bit-build, code and hover awayHover:bit is an air pillow vessel hovering above the ground. A cloud engine with great force ensures the progress and a servo managed tail fin controls the direction. A micro:bit used as a remote and another on the receiving end. Construction and DesignUse the packaging as a fleet and seal or clip out your own in cardboard. Experiments with different shapes and materials and find out what works best. Code with make:codeStill, more people discover micro:bit like a very simple platform with great opportunity space. Hover:bit offers programming guidance for remote control and receiver. Driven driving experience with gyrochondrial control.Because the vessel floats freely, the driving style becomes more like drifting than usual driving. A lightning-fast gyrossor corrects the halerret automatically and the result is an incredibly fun driving experience. Look at it as some kind of anti-spin on smooth lead.

Hummingbird Bit Base Kit from $193.25 ex GST

Inspire deep and joyful learning with the micro:bit-powered Hummingbird Bit Base Kit! The Hummingbird Robotics Kit is comprised of lights, sensors, and motors which allow students to build a robot out of any materials. The power of Hummingbird is in its flexibility - the same reusable kit can animate a poem, model the human arm, build an autonomous rover, or create a pinball machine. Hummingbird epitomises a low-floor, high-ceiling approach: absolute beginners can build & program a robot in minutes, but continue learning advanced engineering & programming for years. PLEASE NOTE A MICRO:BIT IS REQUIRED AND SOLD SEPARATELY. PLEASE CHOOSE CORRECT OPTION CAREFULLY WHEN ORDERING IF YOU REQUIRE A MICRO:BIT All Hummingbird Bit Robotics Kits include: Free classroom-tested and standards-aligned learning materials, such as programming tutorials, lesson plans, and printable student activities. Out-of-the-box compatibility with all laptops and most tablets. Free software that is tested to work with school IT environments. Support for 4 blocks-based and 3 text-based programming environments, including Makecode, Python, and Java. Electrically protected connectors that allow students to easily add multiple motors, sensors, and LEDs without risk of harm due to incorrect connections. Options for online and in-person professional development, including classroom and school district curriculum integration planning. Classroom-ready packaging, including sturdy cases, sorting compartments, and stackable containers. Hummingbird Bit Base Kit Contents: 1 - Bit Controller 1 - Terminal Tool 1 - Battery pack 1 - Green LED 1 - Red LED 1 - Yellow LED 2 - Tri-colour LED 2 - FS90 Servo 2 - Servo Extension Cables 1 - Light sensor 1 - Dial Sensor 1 - User Manual 1 - Base Kit Case

Hummingbird Bit Classroom Bundle from $1,529.53 ex GST

Inspire deep and joyful learning with the micro:bit-powered Hummingbird Bit Base Kit! The Hummingbird Robotics Kit is comprised of lights, sensors, and motors which allow students to build a robot out of any materials. The power of Hummingbird is in its flexibility - the same reusable kit can animate a poem, model the human arm, build an autonomous rover, or create a pinball machine. Hummingbird epitomises a low-floor, high-ceiling approach: absolute beginners can build & program a robot in minutes, but continue learning advanced engineering & programming for years. PLEASE NOTE A MICRO:BIT IS REQUIRED AND SOLD SEPARATELY. PLEASE CHOOSE CORRECT OPTION CAREFULLY WHEN ORDERING IF YOU REQUIRE A MICRO:BIT All Hummingbird Bit Robotics Kits include: Free classroom-tested and standards-aligned learning materials, such as programming tutorials, lesson plans, and printable student activities. Out-of-the-box compatibility with all laptops and most tablets. Free software that is tested to work with school IT environments. Support for 4 blocks-based and 3 text-based programming environments, including Makecode, Python, and Java. Electrically protected connectors that allow students to easily add multiple motors, sensors, and LEDs without risk of harm due to incorrect connections. Options for online and in-person professional development, including classroom and school district curriculum integration planning. Classroom-ready packaging, including sturdy cases, sorting compartments, and stackable containers. Hummingbird Bit Classroom Bundle Contents: 4 - Bit Controller 4 - Terminal Tool 4 - Battery pack 4 - Green LED 4 - Red LED 4 - Yellow LED 8 - Tri-colour LED 8 - FS5103B servo 8 - FS5103R servo 8 - Servo wheels 8 - Lego adapters 16 - 50 cm servo Extension cables 4 - Light sensor 4 - Sound Sensor 4 - Distance Sensor 4 - Rotary Sensor 4 - User Manual 4 - Premium Kit Case Total is 4 Premium Kits Classroom Supplies & Tools (for 8-12 students)

Hummingbird Bit Premium Kit from $377.38 ex GST

Inspire deep and joyful learning with the micro:bit-powered Hummingbird Bit Premium Kit! The Hummingbird Robotics Kit is comprised of lights, sensors, and motors which allow students to build a robot out of any materials. The power of Hummingbird is in its flexibility - the same reusable kit can animate a poem, model the human arm, build an autonomous rover, or create a pinball machine. Hummingbird epitomises a low-floor, high-ceiling approach: absolute beginners can build & program a robot in minutes, but continue learning advanced engineering & programming for years. PLEASE NOTE A MICRO:BIT IS REQUIRED AND SOLD SEPARATELY. PLEASE CHOOSE CORRECT OPTION CAREFULLY WHEN ORDERING IF YOU REQUIRE A MICRO:BIT All Hummingbird Bit Robotics Kits include: Free classroom-tested and standards-aligned learning materials, such as programming tutorials, lesson plans, and printable student activities. Out-of-the-box compatibility with all laptops and most tablets. Free software that is tested to work with school IT environments. Support for 4 blocks-based and 3 text-based programming environments, including Makecode, Python, and Java. Electrically protected connectors that allow students to easily add multiple motors, sensors, and LEDs without risk of harm due to incorrect connections. Options for online and in-person professional development, including classroom and school district curriculum integration planning. Classroom-ready packaging, including sturdy cases, sorting compartments, and stackable containers. Hummingbird Bit Premium Kit Contents: 1 - Bit Controller 1 - Terminal Tool 1 - 4xAA Battery Holder 1 - Green LED 1 - Red LED 1 - Yellow LED 2 - Tri-colour LED 2 - FS5103B servo 2 - FS5103R servo 2 - Servo wheels 2 - Lego adapters 4 - 50 cm servo Extension cables 1 - Light sensor 1 - Sound Sensor 1 - Distance Sensor 1 - Rotary Sensor 1 - User Manual 1 - Premium Kit Case

Hummingbird Duo Base Kit $271.82 ex GST

The Hummingbird Duo Base Kit contains everything you need to build a fun robot with moving parts and lots of LED lights. Sensors in the base kit allow your robot to sense light levels or temperature. Includes: One Hummingbird Duo controller Power supply, USB cable, terminal tool, snap-in stand-offs Red, orange, yellow, and green single-colour LEDs Two tri-colour LEDs Two hobby servos and one servo extension cable One light sensor, and one temperature sensor Program in everything from Scratch to Java!

Invent To Learn: Making, Tinkering, and Engineering in the Classroom $40.86 ex GST

Invent To Learn: Making, Tinkering, and Engineering in the Classroom - Join the maker movement! There’s a technological and creative revolution underway. Amazing new tools, materials and skills turn us all into makers. Using technology to make, repair or customise the things we need brings engineering, design and computer science to the masses. Fortunately for educators, this maker movement overlaps with the natural inclinations of children and the power of learning by doing. The active learner is at the centre of the learning process, amplifying the best traditions of progressive education. This book helps educators bring the exciting opportunities of the maker movement to every classroom. Children are natural tinkerers Their seminal learning experiences come through direct experience with materials. Digital fabrication, such as 3D printing and physical computing, including Arduino, MaKey MaKey and Raspberry Pi, expands a child’s toy and toolboxes with new ways to make things and new things to make. For the first time ever, childhood inventions may be printed, programmed or imbued with interactivity. Recycled materials can be brought back to life. While school traditionally separates art and science, theory and practice, such divisions are artificial. The real world just doesn’t work that way! Architects are artists. Craftsmen deal in aesthetics, tradition and mathematical precision. Video game developers rely on computer science. Engineering and industrial design are inseparable. The finest scientists are often accomplished musicians. The maker community brings children, hobbyists and professionals together in a glorious celebration of personal expression with a modern flare. When 3-D printing, precision cutting, microcomputer control, robotics and computer programming become integral to the art studio, auto shop or physics lab, every student needs access to tools, knowledge and problem solving skills. The maker movement not only blurs the artificial boundaries between subject areas, it erases distinctions between art and science while most importantly obliterating the crippling practice of tracking students in academic pursuits or vocational training. There are now multiple pathways to learning what we have always taught and things to do that were unimaginable just a few years ago. Making for every classroom budget Even if you don’t have access to expensive (but increasingly affordable) hardware, every classroom can become a makerspace where kids and teachers learn together through direct experience with an assortment of high and low-tech materials. The potential range, breadth, power, complexity and beauty of projects has never been greater thanks to the amazing new tools, materials, ingenuity and playfulness you will encounter in this book. In this practical guide, Sylvia Martinez and Gary Stager provide K-12 educators with the how, why, and cool stuff that supports classroom making.

Inventor / CreatorPro Blue Print Bed Tape, 23x15cm $8.18 ex GST

This is a genuine FlashForge replacement sheet for the FlashForge Dreamer, Inventor1, Creator Pro 2016 (v5) and Creator Pro2 (IDEX) printing bed. It is very similar to BuildTak but with more texture on the surface Size: 232 x 154mm It has an adhesive layer with backing sheet (0.7mm total thickness with backing)Tip: When removing the old tape, the glue is very aggressive. We recommend pre-heating to 80-100°C Peel off the old tape and use it (glue side down) to wipe off any remaining glue. Allow to cool before fitting new sheet This tape suits: Dreamer Creator Pro Inventor (1) Creator Pro 2

Find anything you need

Purchase Orders Welcome

First-Class Support

Australian Warehouses

Australian Owned