Products

The Lightspeed DRQ is a low-profile, two-way drop-ceiling speaker that flush-mounts into a suspended ceiling tile to deliver clear, full-range sound evenly across the classroom. Paired with a Lightspeed amplifier system, the DRQ distributes the teacher's voice and multimedia audio so every student hears every word — with a clean, unobtrusive finish and wiring routed neatly overhead. Why choose the DRQ Clean, flush installation — sits flush in an acoustic ceiling tile with the supplied metal tile bridge; no bulky boxes on show. Full-range, two-way sound — a 6.5" driver and 1" tweeter reproduce both speech and multimedia clearly. Even room coverage — a set of four DRQs distributes sound evenly across a typical classroom. Made for suspended ceilings — ideal for rooms with drop ceilings up to around 3.6 m (12 ft) high. Coverage & compatibility Four DRQ speakers cover classrooms of up to around 149 m² (1,600 sq ft) with 9–12 ft ceilings. Designed to work with a Lightspeed classroom amplifier system such as the T25 (or 975). Specifications Model / SKU: DRQ Type: two-way drop-ceiling speaker Drivers: 6.5" woofer + 1" tweeter Frequency response: 40 Hz – 20 kHz Impedance: 8 Ω Power handling: 30 W Enclosure: white ABS ceiling housing with metal grille; UL-listed fire-retardant ABS back-enclosure Tile support: 20-gauge metal tile bridge included Dimensions: 241 mm diameter × 140 mm deep (9.5" × 5.5"); 206 mm (8.125") rough opening Weight: 2.7 kg (5.9 lb) Sold as: single speaker with tile support

Keep your Access Flexmike ready to go with a genuine Lightspeed rechargeable battery pack (NH2.4V) — the 2.4 V NiMH battery for the Access-generation Flexmike (FMA) teacher microphone. Please note: this is the NiMH battery for Access-generation mics. The newer Point-to-Pair Flexmike (FMN) uses a different lithium-ion battery — see the L3.7V battery. Why keep a spare Classroom microphones are used all day, every day, and rechargeable batteries lose capacity over time. It's worth replacing them roughly once a year — and keeping a spare on the shelf — so a flat battery never interrupts a lesson. Specifications Model / SKU: NH2.4V Type: rechargeable NiMH battery pack (2.4 V, AA cells) For: Access-generation Flexmike (FMA)

Keep your Access-generation classroom microphones charged and in one place with the genuine Lightspeed Flexmike cradle charger (FMCA). It holds and charges up to two Flexmike (FMA) microphones and includes its own power supply — and it can also charge an Access Sharemike via the USB charging jack. This is the Access version. For newer Point-to-Pair mics (FMN / SMN), use the FSC cradle charger instead. Why you'll want one Always ready — dock the mics at the end of the day, fully charged by morning. Charges two microphones — plus an Access Sharemike via the USB charging jack. Includes power supply — ready to charge out of the box. Specifications Model / SKU: FMCA Type: desktop microphone cradle charger Capacity: two microphones (plus a Sharemike via USB jack) Charging: cradle Power: 5 V DC (power supply included) Dimensions: 44.5 × 76.2 × 44.5 mm (1.75" × 3" × 1.75")

The Flexmike earbud attachment (EBL) is a Flexmike lanyard with an integrated earbud. The earbud piece attaches to the lanyard and plugs into your existing Flexmike, letting the teacher privately monitor audio while wearing the mic. When you'd use it The earbud is used for monitoring — most useful with Activate and Flexcat (Pod-based) small-group systems, where the teacher listens to small-group or two-way audio through the earbud. It isn't needed for a standard soundfield setup, such as a Redcat used on its own. What it fits Attaches to your existing Lightspeed Flexmike teacher microphone. Specifications Model / SKU: EBL Type: Flexmike lanyard with integrated earbud Use: audio monitoring with Activate / Flexcat systems For: Lightspeed Flexmike

A genuine replacement adjustable lanyard for the Lightspeed Flexmike teacher microphone. Wear the Flexmike comfortably around the neck and adjust the length to suit — a handy spare if the original has worn out or gone missing. What it fits Designed for the Lightspeed Flexmike teacher microphone — both the Access (FMA) and Point-to-Pair (FMN / Flexmike T3) versions. Specifications Model / SKU: FL Type: adjustable neck lanyard For: Lightspeed Flexmike (FMA and FMN)

Keep your classroom microphones ready to go with a genuine Lightspeed rechargeable battery pack. This is the 3.7V lithium-ion battery for the Point-to-Pair Flexmike T3 (FMN) and Sharemike (SMN) wireless microphones — a simple, low-cost spare that keeps mics running through a full teaching day. What it fits Flexmike T3 (FMN) — Point-to-Pair teacher microphone Sharemike (SMN) — Point-to-Pair student microphone Please note: this is the newer lithium-ion (3.7V) battery for Point-to-Pair microphones. It does not fit the older Access-system Flexmike or Sharemike, which use a different NiMH battery — see the Access-system Flexmike battery if your microphones are the earlier generation. Why keep a spare Classroom microphones are used all day, every day, and rechargeable batteries naturally lose capacity over time. It's worth replacing them roughly once a year — and keeping a spare on the shelf — so a flat battery never interrupts a lesson. Specifications Type: rechargeable lithium-ion battery pack Voltage: 3.7V Compatible with: Flexmike T3 (FMN) and Sharemike (SMN) Point-to-Pair microphones Charging: recharges inside the microphone using the standard Flexmike / Sharemike cradle charger

Keep your classroom microphones charged and in one place with the genuine Lightspeed cradle charger (FSC). This desktop dock charges the Point-to-Pair Flexmike (FMN) and Sharemike (SMN) wireless microphones and includes its own power supply — so mics are always docked, always charging, and ready for the first lesson of the day. Why you'll want one Always ready — dock the mics at the end of the day and they're fully charged by morning. No more hunting for mics — a single, tidy home base keeps them from wandering off around the classroom. Includes power supply — everything you need to start charging out of the box. What it fits Flexmike T3 (FMN) — Point-to-Pair teacher microphone Sharemike (SMN) — Point-to-Pair student microphone Please note: this is the charger for the current Point-to-Pair microphones. If your Flexmike or Sharemike are the earlier Access-generation models, they use the older cradle charger instead — see the Access Flexmike cradle charger. Specifications Model / SKU: FSC Type: desktop microphone cradle charger Charges: Flexmike (FMN) and Sharemike (SMN) Point-to-Pair microphones Included: mains power supply

The Lightspeed Flexmike T3 is the pendant-style teacher microphone at the heart of a Lightspeed classroom audio system. Worn on a comfortable magnetic lanyard, it picks up the teacher's natural speaking voice and carries it clearly through the classroom speaker — so there's no need to raise your voice, and every student hears every word. At just 34 g, it's light enough to forget you're wearing it. Why teachers love the Flexmike Speak naturally, all day — your voice is amplified evenly across the room, reducing the vocal strain that builds up over a teaching day. Light and comfortable — a 34 g pendant on a magnetic-clasp lanyard that's quick to put on and take off. Point-to-pair simplicity — just point the Flexmike at your Lightspeed system to connect; no menus, no fuss. All-day battery — up to 8 hours on a charge, so it lasts the school day. Two-way audio for distance learning — the USB-C interface links students at home with the teacher and the live classroom. Point-to-pair, and compatible across the range The Flexmike runs on Lightspeed's Access Technology (1.9 GHz) for a long wireless range with no Wi-Fi interference. It works with the Point-to-Pair Lightspeed systems — including the Redcat, Topcat and T25 (and the 975), the Mobile PA and Access Link — so it's easy to add or move a teacher mic between rooms. What's included Flexmike (FMN) teacher microphone with magnetic-clasp lanyard Rechargeable lithium-ion battery (L3.7V) The cradle charger (FSC) and spare L3.7V batteries are available separately. Specifications Model / SKU: FMN Type: pendant-style teacher microphone (transceiver) Microphone: uni-directional electret Wireless: Access Technology (1.9 GHz), point-to-pair Range: up to 60 m (200 ft) open field Audio distortion: <1% Earbud output: 3.5 mm USB: USB-C for charging and 2-way audio Battery: 3.7 V lithium-ion (L3.7V), up to 8 hours Charging: cradle charger (2 contacts) or USB-C Volume control: ± 12 dB Dimensions: 74 × 28 × 18 mm (2.9" × 1.1" × 0.7") Weight: 34 g (1.2 oz)

The Lightspeed Flexmike is the pendant-style teacher microphone for Lightspeed's Access-generation classroom audio systems. Worn on a comfortable magnetic-clasp lanyard, it picks up the teacher's natural voice and carries it clearly through the classroom speaker — no raised voices, no strain, and every student hears every word. This is the Access (1.9 GHz) version. If your Lightspeed system is a newer Point-to-Pair model, you'll need the Flexmike T3 (FMN) instead. Why teachers love the Flexmike Speak naturally, all day — even amplification across the room reduces the vocal strain that builds over a teaching day. Light and comfortable — a 51 g pendant on a magnetic-clasp lanyard, quick to put on and take off. Monitor and connect — 3.5 mm earbud output, plus an optional USB link to computer audio while charging. All-day battery — up to 8 hours on a charge. What's included Flexmike (FMA) teacher microphone with magnetic-clasp lanyard Rechargeable 2.4 V NiMH battery pack (NH2.4V) The Access cradle charger (FMCA) and spare NH2.4V batteries are available separately. Specifications Model / SKU: FMA Type: pendant-style teacher microphone Microphone: uni-directional electret Wireless: Access Technology (1.9 GHz) Audio distortion: <1% Earbud output: 3.5 mm TRRS Audio input: 3.5 mm Battery: 2.4 V NiMH pack (NH2.4V), up to 8 hours Charging: cradle charging (2 contacts); optional USB audio while charging Volume control: ± 12 dB Dimensions: 74 × 28 × 25 mm (2.9" × 1.1" × 1.0") Weight: 51 g (1.8 oz)

The Lightspeed Media Connector (MCN) brings all your classroom multimedia into your audio system — wirelessly. Connect it to your main media source, such as a computer or interactive display panel, and it transmits high-quality audio straight to your Lightspeed system, so videos, music and online content play clearly through the same speaker that carries the teacher's voice. Why add the Media Connector Multimedia everyone can hear — media audio is distributed evenly across the room, not from a laptop's tinny speaker. Wireless integration — transmits to your Lightspeed system with no long cable runs across the room. Connect several sources — up to four 3.5 mm audio inputs, each with volume control, so you can bring in more than one device. Two-way USB-C audio — links classroom audio with computers for video conferencing and remote learning. What it works with Compatible with Lightspeed Access Technology systems — including the Redcat, Topcat, T25 (and 975) and other Point-to-Pair platforms. Specifications Model / SKU: MCN Type: wireless media transceiver Wireless: Access Technology (1.9 GHz) Audio inputs: 4 × 3.5 mm stereo, each with volume control Audio outputs: 2 × 3.5 mm stereo, mixed, with volume control Digital interface: USB-C 2-way digital audio Tone control: bass / treble Pairing: push button, with front-panel link/pair LED Power: 5 V / 1.0 A via USB-C Dimensions: 197 × 108 × 32 mm (7.75" × 4.25" × 1.25") Weight: 209 g (7.36 oz)

The Lightspeed Mobile PA is a portable, all-in-one instructional audio system that takes clear, powerful sound anywhere learning happens — the gym, the sports oval, assemblies, excursions and beyond. It's a true grab-and-go unit: everything stores on board, it runs all day on battery, and there's no setup, special training or complicated connections. Just pick it up and be heard. Why schools choose the Mobile PA Powerful, portable sound — a 40 W RMS speaker with dedicated woofer and tweeter fills large, active spaces with clear, intelligible audio. All-day battery — the removable, fast-charging battery runs for a full school day and recharges in around 3 hours. Dual power — run it on battery for complete mobility, or plug into AC power for fixed use. Bluetooth with Voice Priority — stream music or media from a phone or laptop, and the teacher's voice automatically ducks the background audio whenever the microphone is in use. Everything on board — an integrated cradle stores and charges the mics, while one-button control and a carry strap with built-in handle make it effortless to move. Point-to-pair wireless, ready anywhere The Mobile PA runs on Lightspeed's Access Technology (1.9 GHz) for a long wireless range (up to 60 m in open field) with no Wi-Fi interference. Pairing is instant — simply point the microphone at the Mobile PA to connect. It's part of the Lightspeed family too, so it works with the same wireless microphones, batteries and Media Connector your school already uses. Double the coverage for bigger spaces Need to cover a full gymnasium or large oval? Add a second Mobile PA as a wireless companion speaker and double the power and coverage area at the press of a button. Ideal for PE, sport and outdoor lessons Assemblies, presentations and performances Excursions, camps and incursions Gymnasiums, halls and other large indoor spaces Any space where a fixed audio system isn't practical What's included Mobile PA portable speaker unit Removable rechargeable battery DC power supply Carrying strap Teacher and student microphones are added with the mic package you choose — see the options below. Specifications Type: portable all-in-one instructional audio system Speaker: two integrated transducers (woofer + tweeter) Power output: 40 watts RMS Wireless: Access Technology (1.9 GHz) Wireless range: up to 60 m (200 ft) open field Bluetooth range: up to 10 m (33 ft) Frequency response: 120 Hz – 13 kHz (-10 dB) Audio in/out: one 3.5 mm input, one 3.5 mm output Tone control: bass / treble adjustment Power: removable rechargeable battery or 24 V DC / 2.5 A AC supply Dimensions: 267 × 191 × 406 mm (10.5" × 7.5" × 16") Weight (with battery): under 4.5 kg (10 lb) Warranty: 5-year Backed by Lightspeed's five-year warranty. Perfect for schools across Australia that need instructional audio wherever the lesson goes — indoors or out.

The battery compartment cover for the Lightspeed Redcat Access speaker unit. Redcat Access systems have a door on the back that houses the optional L14V rechargeable battery — this is the cover for that compartment, used to close it neatly and safely whenever the battery is removed. When you'll need it Running mains-powered — fit the cover to close the compartment when the battery is out and you're running the Redcat from its power supply. Replacement — a handy spare if the original cover has been lost or damaged. What it fits Designed for the Lightspeed Redcat Access speaker unit (systems purchased from June 2016 onward, which have the removable battery door).

A genuine 24 V / 1.75 A replacement power supply for the Lightspeed Redcat Access classroom audio system. Whether you need a spare for a second room or a replacement for a lost or faulty unit, this is the correct, UL-listed supply to keep your Redcat running. What it works with Redcat Access classroom audio systems Activate Station Older 1st and 2nd generation infra-red (IR) Redcat systems It's also the supply used to charge the L14V rechargeable battery that makes the Redcat portable. Specifications Type: AC/DC power supply (mains adapter) Output: 24 V DC, 1.75 A Safety: UL listed Compatible with: Redcat Access, Activate Station, and older IR Redcat systems

The Lightspeed Redcat is an all-in-one classroom soundfield system that delivers the teacher's natural voice evenly to every seat — with no installation. Set it on a table or shelf, point the microphone to pair, and start teaching. Redcat's flat-panel speaker fills the room with clear, intelligible speech so every student hears every word, wherever they sit. Why teachers choose the Redcat Ready out of the box — no costly installation. Plug it in and begin speaking. Even, room-filling sound — an exciter-driven flat-panel speaker spreads audio evenly across the whole room, not just the front rows. Clearer speech, less strain — lifts the teacher's voice above classroom noise and reduces vocal fatigue across the day. Portable and flexible — move it between rooms in seconds; add the optional battery for outdoor and flexible learning spaces. Now with Point-to-Pair and the Clearmike The latest Redcat runs on Lightspeed's Access Technology (1.9 GHz) for longer wireless range with no Wi-Fi interference. Pairing is instant — simply point the Clearmike at the Redcat to connect, so teachers can move between rooms or add components in seconds. The included Clearmike wearable microphone adds an e-paper display, programmable buttons and a built-in alert button for connecting to school safety and communication systems. Built for modern classrooms 2-way audio for distance learning — connect via USB to link students at home with the teacher and the live classroom. Multimedia ready — add the Media Connector to stream audio wirelessly from computers, panels and mobile devices. Student voice — add a Sharemike or Qball microphone so students can be heard clearly during discussion and group work. What's included Redcat all-in-one speaker unit Clearmike wearable teacher microphone with charging cradle Power supply Specifications Room coverage: up to ~110 m² (1,200 sq ft) Speaker: flat-panel exciter technology Power output: 15 watts RMS Frequency response: 110 Hz – 18 kHz (± 8 dB) Wireless: Access Technology (1.9 GHz) Audio in/out: one 3.5 mm input, one 3.5 mm output Tone control: bass / treble adjustment Power input: 24 V DC / 1.75 A Dimensions: 406 × 55 × 241 mm (16" × 2.18" × 9.5") Weight: 1.6 kg (3.5 lb) Clearmike microphone: Access Technology (1.9 GHz) · e-paper display · power/mute, volume, alert and two programmable buttons · 3.5 mm TRRS and USB-C I/O · up to 8 hours battery · USB-C or cradle charging · 5-year warranty. Ideal for primary and secondary classrooms, libraries and hall spaces across Australia. Add the Clearmike, Sharemike or Media Connector as your needs grow.

Mount your Redcat neatly on the wall with the PowerMount — a wall bracket designed for the Lightspeed Redcat and Redcat Access that also holds the power supply. It lifts the Redcat up off the desk and onto the wall, with a tidy home for the power supply and cabling built right in. Why choose the PowerMount Clean wall installation — fix the Redcat securely to the wall for a permanent, out-of-the-way position. Holds the power supply — integrated space keeps the power supply and cabling tidy, rather than dangling or cluttering a bench. Frees up desk space — ideal for smaller rooms or anywhere bench space is at a premium. What it fits Designed for the Lightspeed Redcat and Redcat Access classroom audio systems. Specifications Model / SKU: RCWB Type: wall-mount bracket with power-supply holder Dimensions: 305 × 38 × 45 mm (12" × 1.5" × 1.75") Weight: 272 g (9 oz) Designed for: Lightspeed Redcat and Redcat Access

Cut the cord and take your Redcat anywhere. The Lightspeed L14V rechargeable battery pack turns the Redcat into a fully portable, self-powered classroom audio system — up to 12 hours of clear sound on a single charge, with no power point required. Why add the battery Go fully portable — run the Redcat cordless for outdoor lessons, sport, assemblies and spaces without a convenient power outlet. All-day runtime — up to 12 hours on a single charge. No extra charger needed — it charges straight from the 24 V / 1.75 A power supply that came with your Redcat. What it fits Designed for the Lightspeed Redcat and Redcat Access classroom audio systems (purchased from June 2016 onward), and also compatible with the Mobile PA. Specifications Model / SKU: L14V Type: lithium-ion rechargeable battery pack Rating: 14.8 V, 2800 mAh Battery life: up to 12 hours per charge Charging: via the Redcat / Mobile PA 24 V / 1.75 A power supply (no separate charger needed) Compatible with: Redcat, Redcat Access (from June 2016) and Mobile PA

Take your Redcat anywhere with confidence. This custom-designed soft carry case is shaped to fit the Lightspeed Redcat classroom audio system, with padded protection that keeps it safe as you move it between classrooms or head outside for sport, assemblies and outdoor lessons. Why you'll want one Padded protection — purpose-made to fit the Redcat and cushion it from knocks, dust and the weather while you're on the move. Truly portable — makes the Redcat easy and safe to carry room to room, or out to the oval and back. Go cordless outdoors — pair it with the optional Redcat rechargeable battery to run your Redcat anywhere, with the case to carry it there. What it fits Designed for the Lightspeed Redcat classroom audio system. Specifications Model / SKU: SCRC Type: padded soft carry case Designed for: Lightspeed Redcat

Keep your Access Sharemike ready to go with a genuine Lightspeed rechargeable battery pack (NH2APK) — the AA NiMH battery for the Access-generation Sharemike (SMA) student microphone. Please note: this is the NiMH battery for Access-generation mics. The newer Point-to-Pair Sharemike (SMN) uses a different lithium-ion battery — see the L3.7V battery. Why keep a spare Classroom microphones are used all day, every day, and rechargeable batteries lose capacity over time. It's worth replacing them roughly once a year — and keeping a spare on hand — so a flat battery never interrupts a lesson. Specifications Model / SKU: NH2APK Type: rechargeable NiMH battery pack (AA cells) For: Access-generation Sharemike (SMA)

The Lightspeed Sharemike is a handheld student microphone made for pass-around use, so every student can be heard clearly — across the room and by classmates learning remotely. Pass it around during discussion, group work or presentations, and quieter voices carry just as clearly as the teacher's. Students simply switch it on and speak. Why add a Sharemike Every student is heard — not just the confident ones at the front; the whole class hears each contribution clearly. Builds confidence and participation — when students know they'll be heard, they're more willing to share. Simple pass-around design — a robust handheld with a single on/off button; nothing for students to fiddle with. Includes remote peers — the USB-C 2-way audio interface carries student voices to classmates learning from home. All-day battery — up to 8 hours on a charge. Point-to-pair, and compatible across the range The Sharemike runs on Lightspeed's Access Technology (1.9 GHz) for a long wireless range with no Wi-Fi interference. It pairs with the Point-to-Pair Lightspeed systems — including the Redcat, Topcat and T25 (and the 975), the Mobile PA and Access Link — so you can add student voice to any classroom. What's included Sharemike (SMN) handheld student microphone Rechargeable lithium-ion battery (L3.7V) The cradle charger (FSC) and spare L3.7V batteries are available separately. Specifications Model / SKU: SMN Type: handheld student microphone (transceiver) Microphone: uni-directional electret Wireless: Access Technology (1.9 GHz), point-to-pair Audio distortion: <1% USB: USB-C 2-way digital audio interface Battery: 3.7 V lithium-ion (L3.7V), up to 8 hours Charging: cradle charger (2 contacts) Power: on/off button Dimensions: 153 × 28 × 28 mm (6.0" × 1.1" × 1.1") Weight: 73 g (2.6 oz)

The Lightspeed Sharemike is a robust handheld student microphone for pass-around use, so every student can be heard clearly across the room. Hand it around during discussion, group work or presentations — quieter voices carry just as clearly as the teacher's. This is the microphone for Lightspeed's Access-generation systems. This is the Access (1.9 GHz) version. For a newer Point-to-Pair system, you'll need the Sharemike (SMN) instead. Why add a Sharemike Every student is heard — the whole class hears each contribution clearly, not just the confident voices at the front. Builds confidence and participation — students share more freely when they know they'll be heard. Simple, robust handheld — a single on/off/mute switch and a durable body made to be passed around. All-day battery — up to 8 hours on a charge. What's included Sharemike (SMA) handheld student microphone Rechargeable 2-cell AA NiMH battery pack (NH2APK) Spare NH2APK batteries are available separately. Specifications Model / SKU: SMA Type: handheld student microphone Microphone: uni-directional dynamic Wireless: Access Technology (1.9 GHz) Audio distortion: <1% Audio input: 3.5 mm Battery: 2 × AA NiMH pack (NH2APK), up to 8 hours Charging: 5 V charging jack Dimensions: 57 × 57 × 222 mm (2.25" × 2.25" × 8.75") Weight: 224 g (7.9 oz) Warranty: 5-year

The Lightspeed T25 is an installed classroom audio system built around a compact wireless amplifier hub. It delivers clear, even distribution of the teacher's voice, student voices and multimedia audio throughout the room, connecting to your ceiling or wall speakers for a permanent, professional install. The T25 is Lightspeed's successor to the long-running 975 amplifier, adding point-to-pair wireless, digital multimedia inputs and built-in integration with school life-safety systems. Why schools choose the T25 Clear, even audio for the whole room — distributes the teacher's natural voice and multimedia evenly through ceiling or wall speakers, so every student hears every word. One connected hub — brings the teacher microphone, classroom multimedia and student microphones together through a single amplifier. Built for permanent installation — ideal for new builds, refurbishments and room additions where a fixed, out-of-the-way system is preferred. Safety built in — integrates with your existing paging, fire and life-safety systems so critical announcements are never missed. Point-to-pair wireless with the Clearmike The T25 runs on Lightspeed's Access Technology (1.9 GHz) for longer wireless range with no Wi-Fi interference. Pairing is instant — simply point the Clearmike at the T25 to connect, so teachers can move between rooms or add components in seconds. The Clearmike wearable microphone includes programmable buttons and an alert button for one-touch safety notifications, plus 2-way USB audio to connect students learning from home. Built-in life-safety integration Paging: automatically mutes the instructional audio when a classroom announcement is broadcast. Fire alarms: mutes the instructional audio when the fire alarm is activated. Alert notifications: the teacher can trigger an alert directly from the microphone via the T25's contact-closure output. Build your T25 system The T25 is a modular system — choose the components to suit each room: T25 amplifier + Clearmike teacher microphone — the core of every system Speakers — TCS multimedia ceiling speakers, DRQ drop-ceiling speakers or WMQ wall speakers, selected to suit the room size and ceiling type Student microphones — add Sharemike or T3 microphones so students can be heard clearly across the room and by remote peers What's included T25 wireless amplifier / audio hub Clearmike wearable teacher microphone with charging cradle Power supply Specifications Type: installed wireless audio hub / amplifier Wireless: Access Technology (1.9 GHz) Power output: 40 W RMS total (2 × 20 W RMS) with 24 V DC supply Frequency response: 20 Hz – 20 kHz (power amp); 150 Hz – 6.5 kHz (wireless) Audio inputs: three 3.5 mm inputs + one S/PDIF coaxial digital input Audio output: one 3.5 mm output Control signals: PageFirst (25/70 V page mute) and relay inputs; contact-closure output (triggered from the microphone) Tone control: bass / treble Total harmonic distortion: <1% Power input: 24 V DC / 2.5 A Dimensions: 229 × 155 × 30 mm (9.0" × 6.1" × 1.2") Weight: 468 g (16.5 oz) Clearmike microphone: Access Technology (1.9 GHz) · e-paper display · power/mute, volume, alert and two programmable buttons · 3.5 mm TRRS and USB-C I/O · up to 8 hours battery · USB-C or cradle charging · 5-year warranty. Upgrading from an older Lightspeed 975? The T25 is its direct successor. Ideal for primary and secondary classrooms, libraries and hall spaces across Australia.

The Lightspeed TCQ is a flat-panel hybrid ceiling speaker that fills an entire classroom with clear, even sound — from a single unit. It combines Lightspeed's Exciter Technology flat panel (the same approach used in the Redcat and Topcat) with a low-frequency cone driver, delivering high speech intelligibility and full-range multimedia audio, so every student hears every word. Why choose the TCQ One speaker, whole-room coverage — a single TCQ covers a typical classroom, so there's less to install and wire than a four-speaker array. Even, wide distribution — flat-panel exciter technology spreads sound evenly across the room rather than beaming it from a single point. Clear speech and multimedia — the hybrid panel-plus-cone design handles both the teacher's voice and full-range media audio. Clean, unobtrusive fit — drops into a standard suspended ceiling grid with the supplied mounting hardware. Compatibility Designed for use with Lightspeed classroom amplifier systems. Fits standard 2' × 2' or 2' × 4' suspended ceiling grid tiles. Specifications Model / SKU: TCQ Type: two-way hybrid ceiling speaker (flat-panel exciter + low-frequency cone) Frequency response: 80 Hz – 20 kHz (± 10 dB) Impedance: 4 Ω Power handling: 20 W RMS Ceiling fit: standard 2' × 2' or 2' × 4' suspended ceiling grid Included: mounting hardware and safety wire

The Lightspeed Topcat is an all-in-one, ceiling-mounted classroom audio system that distributes the teacher's voice and multimedia evenly across the whole room. Its hybrid speaker design pairs a flat-panel speaker for clear, intelligible speech with a cone speaker for full-range multimedia sound — all in a single unit that lays neatly into the ceiling. With wireless audio integration and simple installation, the Topcat suits both new builds and existing classrooms. Why schools choose the Topcat Full-range hybrid audio — a flat-panel speaker spreads speech evenly to every seat, while a dedicated cone speaker delivers rich multimedia sound. Seamless ceiling design — disappears into the ceiling for a clean, clutter-free room, with no speakers taking up wall or floor space. Lower installation cost — wireless connectivity to microphones and multimedia removes the need for long, expensive cabling runs. Even coverage for the whole class — every student hears the teacher clearly, wherever they sit. Point-to-pair wireless with the Clearmike The Topcat runs on Lightspeed's Access Technology (1.9 GHz) for longer wireless range with no Wi-Fi interference. Pairing is instant — simply point the Clearmike at the Topcat to connect, so teachers can move between rooms or add components in seconds. The Clearmike wearable microphone includes programmable buttons and an alert button for one-touch safety notifications, plus 2-way USB audio to connect students learning from home. Built-in life-safety integration Paging: automatically mutes the instructional audio when a classroom announcement is broadcast. Fire alarms: mutes the instructional audio when the fire alarm is activated. Alert notifications: the teacher can trigger an alert directly from the microphone via the Topcat's contact-closure output. Engage every student Student voice — add a Sharemike or Qball microphone so students can be heard clearly across the room and by remote peers. Multimedia ready — add the Media Connector to stream audio wirelessly from computers, panels and mobile devices. What's included Topcat ceiling-mounted speaker unit Clearmike wearable teacher microphone with charging cradle Power supply A wall-mount bracket is available separately for installations that aren't fitted into a ceiling grid. Specifications Type: all-in-one ceiling-mounted instructional audio system Speaker: hybrid — flat-panel (speech) + cone (multimedia) Wireless: Access Technology (1.9 GHz) Power output: 20 W RMS Frequency response: 20 Hz – 20 kHz (power amp); 150 Hz – 6.5 kHz (wireless) Audio inputs: three 3.5 mm inputs + one S/PDIF coaxial digital input Audio output: one 3.5 mm output Control signals: PageFirst (25/70 V page mute) and relay inputs; contact-closure output (triggered from the microphone) Tone control: bass / treble Total harmonic distortion: <1% Power: AC mains 100–240 V ~ 50/60 Hz, 1.5 A Dimensions: 603 × 298 × 106 mm (23.75" × 11.73" × 4.19") Weight: 9.2 kg (21.2 lb) Mounting: in-ceiling installation, or wall-mount with bracket Clearmike microphone: Access Technology (1.9 GHz) · e-paper display · power/mute, volume, alert and two programmable buttons · 3.5 mm TRRS and USB-C I/O · up to 8 hours battery · USB-C or cradle charging · 5-year warranty. Ideal for new construction and classroom refurbishments across Australia where a clean, permanent, whole-room audio solution is preferred. Installation should be carried out by a licensed electrician.

The UConnect range including UConnect SoundHouse and UConnect Mini are agile plug and play hearing augmentation solutions for any learning space. Learners, teachers and visitors now wear different hearing aids with different types of inbuilt receivers; there is no universal platform to achieve transmission of audio to receivers in those aids. Traditional solutions alone should not be adopted should you wish to future proof your buildings.