Products

Keep your Access Flexmike ready to go with a genuine Lightspeed rechargeable battery pack (NH2.4V) — the 2.4 V NiMH battery for the Access-generation Flexmike (FMA) teacher microphone. Please note: this is the NiMH battery for Access-generation mics. The newer Point-to-Pair Flexmike (FMN) uses a different lithium-ion battery — see the L3.7V battery. Why keep a spare Classroom microphones are used all day, every day, and rechargeable batteries lose capacity over time. It's worth replacing them roughly once a year — and keeping a spare on the shelf — so a flat battery never interrupts a lesson. Specifications Model / SKU: NH2.4V Type: rechargeable NiMH battery pack (2.4 V, AA cells) For: Access-generation Flexmike (FMA)

Keep your Access-generation classroom microphones charged and in one place with the genuine Lightspeed Flexmike cradle charger (FMCA). It holds and charges up to two Flexmike (FMA) microphones and includes its own power supply — and it can also charge an Access Sharemike via the USB charging jack. This is the Access version. For newer Point-to-Pair mics (FMN / SMN), use the FSC cradle charger instead. Why you'll want one Always ready — dock the mics at the end of the day, fully charged by morning. Charges two microphones — plus an Access Sharemike via the USB charging jack. Includes power supply — ready to charge out of the box. Specifications Model / SKU: FMCA Type: desktop microphone cradle charger Capacity: two microphones (plus a Sharemike via USB jack) Charging: cradle Power: 5 V DC (power supply included) Dimensions: 44.5 × 76.2 × 44.5 mm (1.75" × 3" × 1.75")

The Flexmike earbud attachment (EBL) is a Flexmike lanyard with an integrated earbud. The earbud piece attaches to the lanyard and plugs into your existing Flexmike, letting the teacher privately monitor audio while wearing the mic. When you'd use it The earbud is used for monitoring — most useful with Activate and Flexcat (Pod-based) small-group systems, where the teacher listens to small-group or two-way audio through the earbud. It isn't needed for a standard soundfield setup, such as a Redcat used on its own. What it fits Attaches to your existing Lightspeed Flexmike teacher microphone. Specifications Model / SKU: EBL Type: Flexmike lanyard with integrated earbud Use: audio monitoring with Activate / Flexcat systems For: Lightspeed Flexmike

A genuine replacement adjustable lanyard for the Lightspeed Flexmike teacher microphone. Wear the Flexmike comfortably around the neck and adjust the length to suit — a handy spare if the original has worn out or gone missing. What it fits Designed for the Lightspeed Flexmike teacher microphone — both the Access (FMA) and Point-to-Pair (FMN / Flexmike T3) versions. Specifications Model / SKU: FL Type: adjustable neck lanyard For: Lightspeed Flexmike (FMA and FMN)

Keep your classroom microphones ready to go with a genuine Lightspeed rechargeable battery pack. This is the 3.7V lithium-ion battery for the Point-to-Pair Flexmike T3 (FMN) and Sharemike (SMN) wireless microphones — a simple, low-cost spare that keeps mics running through a full teaching day. What it fits Flexmike T3 (FMN) — Point-to-Pair teacher microphone Sharemike (SMN) — Point-to-Pair student microphone Please note: this is the newer lithium-ion (3.7V) battery for Point-to-Pair microphones. It does not fit the older Access-system Flexmike or Sharemike, which use a different NiMH battery — see the Access-system Flexmike battery if your microphones are the earlier generation. Why keep a spare Classroom microphones are used all day, every day, and rechargeable batteries naturally lose capacity over time. It's worth replacing them roughly once a year — and keeping a spare on the shelf — so a flat battery never interrupts a lesson. Specifications Type: rechargeable lithium-ion battery pack Voltage: 3.7V Compatible with: Flexmike T3 (FMN) and Sharemike (SMN) Point-to-Pair microphones Charging: recharges inside the microphone using the standard Flexmike / Sharemike cradle charger

Keep your classroom microphones charged and in one place with the genuine Lightspeed cradle charger (FSC). This desktop dock charges the Point-to-Pair Flexmike (FMN) and Sharemike (SMN) wireless microphones and includes its own power supply — so mics are always docked, always charging, and ready for the first lesson of the day. Why you'll want one Always ready — dock the mics at the end of the day and they're fully charged by morning. No more hunting for mics — a single, tidy home base keeps them from wandering off around the classroom. Includes power supply — everything you need to start charging out of the box. What it fits Flexmike T3 (FMN) — Point-to-Pair teacher microphone Sharemike (SMN) — Point-to-Pair student microphone Please note: this is the charger for the current Point-to-Pair microphones. If your Flexmike or Sharemike are the earlier Access-generation models, they use the older cradle charger instead — see the Access Flexmike cradle charger. Specifications Model / SKU: FSC Type: desktop microphone cradle charger Charges: Flexmike (FMN) and Sharemike (SMN) Point-to-Pair microphones Included: mains power supply

The battery compartment cover for the Lightspeed Redcat Access speaker unit. Redcat Access systems have a door on the back that houses the optional L14V rechargeable battery — this is the cover for that compartment, used to close it neatly and safely whenever the battery is removed. When you'll need it Running mains-powered — fit the cover to close the compartment when the battery is out and you're running the Redcat from its power supply. Replacement — a handy spare if the original cover has been lost or damaged. What it fits Designed for the Lightspeed Redcat Access speaker unit (systems purchased from June 2016 onward, which have the removable battery door).

A genuine 24 V / 1.75 A replacement power supply for the Lightspeed Redcat Access classroom audio system. Whether you need a spare for a second room or a replacement for a lost or faulty unit, this is the correct, UL-listed supply to keep your Redcat running. What it works with Redcat Access classroom audio systems Activate Station Older 1st and 2nd generation infra-red (IR) Redcat systems It's also the supply used to charge the L14V rechargeable battery that makes the Redcat portable. Specifications Type: AC/DC power supply (mains adapter) Output: 24 V DC, 1.75 A Safety: UL listed Compatible with: Redcat Access, Activate Station, and older IR Redcat systems

Mount your Redcat neatly on the wall with the PowerMount — a wall bracket designed for the Lightspeed Redcat and Redcat Access that also holds the power supply. It lifts the Redcat up off the desk and onto the wall, with a tidy home for the power supply and cabling built right in. Why choose the PowerMount Clean wall installation — fix the Redcat securely to the wall for a permanent, out-of-the-way position. Holds the power supply — integrated space keeps the power supply and cabling tidy, rather than dangling or cluttering a bench. Frees up desk space — ideal for smaller rooms or anywhere bench space is at a premium. What it fits Designed for the Lightspeed Redcat and Redcat Access classroom audio systems. Specifications Model / SKU: RCWB Type: wall-mount bracket with power-supply holder Dimensions: 305 × 38 × 45 mm (12" × 1.5" × 1.75") Weight: 272 g (9 oz) Designed for: Lightspeed Redcat and Redcat Access

Cut the cord and take your Redcat anywhere. The Lightspeed L14V rechargeable battery pack turns the Redcat into a fully portable, self-powered classroom audio system — up to 12 hours of clear sound on a single charge, with no power point required. Why add the battery Go fully portable — run the Redcat cordless for outdoor lessons, sport, assemblies and spaces without a convenient power outlet. All-day runtime — up to 12 hours on a single charge. No extra charger needed — it charges straight from the 24 V / 1.75 A power supply that came with your Redcat. What it fits Designed for the Lightspeed Redcat and Redcat Access classroom audio systems (purchased from June 2016 onward), and also compatible with the Mobile PA. Specifications Model / SKU: L14V Type: lithium-ion rechargeable battery pack Rating: 14.8 V, 2800 mAh Battery life: up to 12 hours per charge Charging: via the Redcat / Mobile PA 24 V / 1.75 A power supply (no separate charger needed) Compatible with: Redcat, Redcat Access (from June 2016) and Mobile PA

Take your Redcat anywhere with confidence. This custom-designed soft carry case is shaped to fit the Lightspeed Redcat classroom audio system, with padded protection that keeps it safe as you move it between classrooms or head outside for sport, assemblies and outdoor lessons. Why you'll want one Padded protection — purpose-made to fit the Redcat and cushion it from knocks, dust and the weather while you're on the move. Truly portable — makes the Redcat easy and safe to carry room to room, or out to the oval and back. Go cordless outdoors — pair it with the optional Redcat rechargeable battery to run your Redcat anywhere, with the case to carry it there. What it fits Designed for the Lightspeed Redcat classroom audio system. Specifications Model / SKU: SCRC Type: padded soft carry case Designed for: Lightspeed Redcat

Get your Redcat standing steady with a genuine set of Lightspeed Redcat table stand feet (RCTS). These are the feet the Redcat sits on for tabletop and shelf use — a handy replacement set if yours have been lost or worn, or a spare to keep on hand. Two ways to use them Tabletop stand — fit the feet to stand the Redcat securely on a table, bench or cabinet. Wall-mount brackets — the same feet double as wall-mount brackets; pair them with suitable screws and wall anchors to fix the Redcat to a wall. What it fits Designed for the Lightspeed Redcat and Redcat Access classroom audio systems. Specifications Model / SKU: RCTS Type: Redcat table stand feet (also usable as wall-mount brackets) Designed for: Lightspeed Redcat and Redcat Access

Keep your Access Sharemike ready to go with a genuine Lightspeed rechargeable battery pack (NH2APK) — the AA NiMH battery for the Access-generation Sharemike (SMA) student microphone. Please note: this is the NiMH battery for Access-generation mics. The newer Point-to-Pair Sharemike (SMN) uses a different lithium-ion battery — see the L3.7V battery. Why keep a spare Classroom microphones are used all day, every day, and rechargeable batteries lose capacity over time. It's worth replacing them roughly once a year — and keeping a spare on hand — so a flat battery never interrupts a lesson. Specifications Model / SKU: NH2APK Type: rechargeable NiMH battery pack (AA cells) For: Access-generation Sharemike (SMA)