Sphero indi Folding Code Mat (4 Pack)
$199.99 ex GST
($219.99 inc GST)
The Sphero indi Folding Code Mat set gives young learners a clear, grid-based surface to build routes, solve challenges and bring their coding ideas to life with the indi robot. Because the grid is sized to indi's colour tiles, children can concentrate on planning a sequence rather than lining up tiles — so early coding lessons run more smoothly for students and teachers alike.
What's included:
4 folding code mats (each opens to 80cm x 129cm)
4 sticker packs — 30 reusable cling stickers per pack
Dry-erase surface for drawing mazes, paths and stories
Grid sized for Sphero indi colour tiles
Designed for 2–4 students per mat
Works on tile, wood, concrete or low-pile carpet
Folds down to 16.2cm square for storage
Compatible with Sphero indi (robot not included)
Learning benefits — paired with indi, the mats give children practice in:
Computational thinking and sequencing — planning a route step by step
Problem-solving — testing an idea, spotting what went wrong and trying again
Spatial awareness — placing colour tiles accurately on the gridTeamwork — sharing a mat and working through problems together
Creativity — using stickers and the dry-erase surface for storytelling and cross-curricular activities
Everything is reusable and wipe-clean, so each mat is ready for a fresh challenge next lesson — then folds flat in seconds for tidy classroom storage.
Makey Makey Code-a-Key micro:bit Backpack
$54.50 ex GST
($59.95 inc GST)
Bring sensors into your inventions. The Makey Makey Code-a-Key Backpack is an adaptor board that connects a BBC micro:bit to your Makey Makey, so motion, light, sound and temperature can trigger key presses and mouse control — no tangle of wires or breadboarding needed.
What it does:
Clips onto the back of your Makey Makey and holds a BBC micro:bit (V1 or V2)
Lets the micro:bit trigger up to 6 key presses and full mouse control
Works both ways — the micro:bit can also respond to your key or mouse activity by showing an image, playing a sound or driving a servo motor
Includes the Code-a-Key Backpack, instructions and a Makey Makey sticker
What your child practises:
Combining physical computing with sensor-based coding in MakeCode
Cause and effect — linking real-world inputs to on-screen actions
Creative problem-solving across two connected devices
Works with Makey Makey version 1.5 or higher. A Makey Makey Classic board and a BBC micro:bit are sold separately.
Browse the full Makey Makey range →
Interactive coding accessories pack for micro:bit
$61.00 ex GST
($67.10 inc GST)
The Interactive Coding Pack contains the Trimpot module, NeoPixel 8 module, Gesture sensor, Colour sensor and almost 180pcs bricks, it gives kids more chances to solve problems and create projects!
Compatible with TPBot smart car and Nezha Inventor’s kit, it inspires kids more with the add-on functions.
micro:bit Nezha Inventor Classroom Pack
$2,780.00 ex GST
($3,058.00 inc GST)
This Classroom Pack includes:
10 x Nezha Inventor Kits10 x micro:bit GO Ver 2 Packs10 x Interactive coding accessories pack30 x Student Licenses to our Online Learning Academy for project tutorials1 x Teacher Licenses to our Online Learning Academy for project tutorials
Based on Planet X sensors, Nezha Inventor's Kit is designed for BBC micro:bit. It contains multiple sensors, ultrasonic sensor, crash sensor, line-tracking sensor and over 400 pieces of bricks x 10. Includes 36 projects on our Online Academy for this kit - cultivate and inspire kids' creativity and imagination!
Learn how to build and code these inventions with our Online Academy Lessons - subscription included in this package!
Highlights
Planet X Sensors: contains multiple sensors and modules including LED, trimpot, soil moisture sensor, ultrasonic sensor, crash sensor, line-tracking sensor, etc.
18 Programming Fun Projects(continuously updated) and Over 400+ Bricks Kit: Not limited to default projects, children can create what they want. The purpose is to cultivate and inspire kid's creativity and imagination.
microbit NeZha Expansion Board: Rich expansion equiped with 4 servo connections, 4 motor connections and 7 sensor connections.
Simple connection: NeZha Expansion Board can be connected to Planet X sensors with the RJ11 cable, and it is compatible with building blocks.
Built-in 900 mAh Lithium Battery: it can be used normally for 2 hours after charging. Protects from over-current, short-circuit and electrostatic.
Projects on our Online Academy
Project 1 - Traffic Lights
Project 2 - Flower-watering Prompter
Project 3 - Automatic Gate
Project 4 - Mini Table Lamps
Project 5 - Automatic Dryer
Project 6 - Temperature-controlled Fan
Project 7 - Smart Lamps
Project 8 - Speed Adjustable Fans
Project 9 - Invading Detection Device
Project 10 - Speed Adjustable Car
Project 11 - Line-tracking Car
Project 12 - Obstacles Avoidance Car
Project 13 - Lively Music
Project 14 - Guess the tones
Project 15 - Volume Reminder
Project 16 - Memory Test
Project 17 - Alarm Device
Project 18 - Music Box
Project 19 - The Automatic Laundry Rack
Project 20 - Micro:bit Avoiding Bricks
Project 21 - An Oscillating Fan
Project 22 - Micro:bit Helix
Project 23 - micro:bit Crawlers
Project 24 - The Climbing LEDs
Project 25 - Colours of the Emotions
Project 26 - The Volume Indicator
Project 27 - The Distance Indicator
Project 28 - The Corridor Lights
Project 29 - The Dazzling Car
Project 30 - Adjustable lights
Project 31 - The Rotary Password Door
Project 32 - Gesture Recognition Ring LEDs
Project 33 - Colour-controlled Lights
Project 34 - Gesture Recognition Car
Project 35 - Colour Recognition Car
Project 36 - Colour Recognition Password Door
Hummingbird Bit Classroom Bundle
from $1,726.36 ex GST
($1,899.00 inc GST)
Inspire deep and joyful learning with the micro:bit-powered Hummingbird Bit Base Kit! The Hummingbird Robotics Kit is comprised of lights, sensors, and motors which allow students to build a robot out of any materials. The power of Hummingbird is in its flexibility - the same reusable kit can animate a poem, model the human arm, build an autonomous rover, or create a pinball machine.
Hummingbird epitomises a low-floor, high-ceiling approach: absolute beginners can build & program a robot in minutes, but continue learning advanced engineering & programming for years.
PLEASE NOTE A MICRO:BIT IS REQUIRED AND SOLD SEPARATELY. PLEASE CHOOSE CORRECT OPTION CAREFULLY WHEN ORDERING IF YOU REQUIRE A MICRO:BIT
All Hummingbird Bit Robotics Kits include:
Free classroom-tested and standards-aligned learning materials, such as programming tutorials, lesson plans, and printable student activities.
Out-of-the-box compatibility with all laptops and most tablets.
Free software that is tested to work with school IT environments.
Support for 4 blocks-based and 3 text-based programming environments, including Makecode, Python, and Java.
Electrically protected connectors that allow students to easily add multiple motors, sensors, and LEDs without risk of harm due to incorrect connections.
Options for online and in-person professional development, including classroom and school district curriculum integration planning.
Classroom-ready packaging, including sturdy cases, sorting compartments, and stackable containers.
Hummingbird Bit Small Classroom Bundle Contents:
4 - Bit Controller
4 - Terminal Tool
4 - Battery pack
4 - Green LED
4 - Red LED
4 - Yellow LED
8 - Tri-colour LED
8 - FS5103B servo
8 - FS5103R servo
8 - Servo wheels
8 - Lego adapters
16 - 50 cm servo Extension cables
4 - Light sensor
4 - Sound Sensor
4 - Distance Sensor
4 - Rotary Sensor
4 - User Manual
4 - Premium Kit Case Total is 4 Premium Kits Classroom Supplies & Tools (for 8-12 students)
The Classroom Bundle comes in three sizes:
Small: 4 Premium Kits + Stacking Container + Classroom Supplies & Tools (for 8-12 students)
Medium: 8 Premium Kits + 2 Stacking Containers + Classroom Supplies & Tools (for 16-24 students)
Large: 12 Premium Kits + 3 Stacking Containers + Classroom Supplies & Tools (for 24-36 students)
If you opt to purchase the kit with micro:bits, you will receive 4 micro:bits for a Small Bundle, 8 micro:bits for a Medium Bundle, 12 micro:bits for a Large Bundle.
Hummingbird Bit Base Kit
from $235.45 ex GST
($259.00 inc GST)
Inspire deep and joyful learning with the micro:bit-powered Hummingbird Bit Base Kit! The Hummingbird Robotics Kit is comprised of lights, sensors, and motors which allow students to build a robot out of any materials. The power of Hummingbird is in its flexibility - the same reusable kit can animate a poem, model the human arm, build an autonomous rover, or create a pinball machine.
Hummingbird epitomises a low-floor, high-ceiling approach: absolute beginners can build & program a robot in minutes, but continue learning advanced engineering & programming for years.
PLEASE NOTE A MICRO:BIT IS REQUIRED AND SOLD SEPARATELY. PLEASE CHOOSE CORRECT OPTION CAREFULLY WHEN ORDERING IF YOU REQUIRE A MICRO:BIT
All Hummingbird Bit Robotics Kits include:
Free classroom-tested and standards-aligned learning materials, such as programming tutorials, lesson plans, and printable student activities.
Out-of-the-box compatibility with all laptops and most tablets.
Free software that is tested to work with school IT environments.
Support for 4 blocks-based and 3 text-based programming environments, including Makecode, Python, and Java.
Electrically protected connectors that allow students to easily add multiple motors, sensors, and LEDs without risk of harm due to incorrect connections.
Options for online and in-person professional development, including classroom and school district curriculum integration planning.
Classroom-ready packaging, including sturdy cases, sorting compartments, and stackable containers.
Hummingbird Bit Base Kit Contents:
1 - Bit Controller
1 - Terminal Tool
1 - Battery pack
1 - Green LED
1 - Red LED
1 - Yellow LED
2 - Tri-colour LED
2 - FS90 Servo
2 - Servo Extension Cables
1 - Light sensor
1 - Dial Sensor
1 - User Manual
1 - Base Kit Case
Kai's Clan CREATE Activity Mat
$395.00 ex GST
($434.50 inc GST)
The Create Activity Mat gives students the freedom of creation in the classroom to solve problems associated with science, technology, engineering and mathematics (STEAM) teaching and learning. Overlay your own designs to incorporate into your own lessons. Includes premium 3D, AR, and VR content. Does not include AR VR content.
This high quality neoprene mat is designed for classroom use. It is easy to clean, durable and folds away neatly without creasing. Access a wider selection of coding lessons or even create your own!
Note: This mat does not include AR or VR content.
Material: Neoprene
Size: 980mm x 980mm
Kai's Clan 4 Robot Start Pack
$1,359.00 ex GST
($1,494.90 inc GST)
Rescue Run AR & VR Adventure Mat with dragons, knights and capture the flag battles!
Kai’s Clan is so much more than just a yellow robot! A place where the physical and the virtual worlds merge to become an interactive learning playground.
Students code their robots to navigate the mat in real life, in real-time, wherever they are in the world. At the same time their 3D characters collaborate in a virtual environment.
Kai’s Clan breaks the traditional geographical barriers to bring kids from around the world together and allow them to solve challenges in exciting new ways.
You can start this learning revolution today, with Kai's Clan.
Create your own AR / VR worlds
Build 3D environments using Minecraft or Tinkercad
Kai’s Clan’s newest feature allows students to create their own Robot avatars in Tinkercad or Minecraft. Used for storytelling, students create their own Minecraft hero and when they code their Kai robot to move around, the Robot 3D avatar also moves around the virtual world.
Create 3D environments that align with the lessons you teach and then view your lesson in AR or VR!
Multiplayer coding
Make coding a team sport
Students work together to solve real-world problems, whether within the same classroom or with someone on the other side of the world, using multiplayer Scratch/Blockly coding.
Virtual Reality
Create interactive virtual environments
Let your students create & jump into the driver’s seat of a rover on Mars, a forklift in a busy warehouse, or the pilot’s seat in a plane high over a thriving metropolis.
Augmented Reality
Expand what is possible in the classroom
Make, create and enrich your student’s learning with Kai’s Augmented Reality. See your code come to life in an interactive learning playground.
What's included
4x Kai Robots (rechargeable batteries included – 4 hrs play with 1 hr fast charge time)
1x Rescue Run AR VR Adventure Mat (1 x 1 meter tough & durable neoprene)
1x Smartphone Tripod (smartphone for tracking robots not included)
Kai Bit Sensor Pack Includes: Temperature, Humidity, Motion, LED, Button, Infrared receiver, Infrared remote,
LED Matrix, Potentiometer, LED Strip
4-way USB Charging Cable
Sticker Pack
Kai’s Coding Cards Packs
Quick Start Guide
Various spare parts
Kai’s Eye Robot Tracker app available for download in the Google Play or Apple App stores.
Kai’s AR VR Virtual Viewer app available for download in the Google Play or Apple App stores.
Plus includes over 35 education lesson plans
Kai's Clan Smart City AR VR Adventure Mat
$719.00 ex GST
($790.90 inc GST)
Smart cities need smart people. Included with this mat are 3D, AR, and VR content that asks “what will be the impact of future cities on the people that live in them?” Use sensors, IoT, and creative problem-solving! Includes ‘on the mat’ and ‘outside’ classroom activities.
It is designed for classroom use and is easy to clean, durable and folds away neatly without creasing.
Included with this mat is a matching virtual smart city environment that you can view in either:
3D with your Chrome, Safari or Edge browser
Augmented Reality with a compatible Android or iOS device
Virtual Reality with a compatible Android or iOS device
This Kai’s Clan AR VR Adventure mat gives you access to exclusive Smart City lesson plans & activities, a digital 3D view of the coding environment, augmented reality, and virtual reality!
This high-quality neoprene mat is designed for classroom use. It is easy to clean, durable, and folds away neatly without creasing.
Mat Size - 980mm x 980mmGrid size - 800mm x 800mmMaterial - Neoprene – machine washable
Kai's Clan Automated Warehouse AR VR Adventure Mat
$719.00 ex GST
($790.90 inc GST)
Autonomous Warehouse AR VR Adventure Mat
Is buying something as simple as just one click?
This Autonomous Warehouse mat, combined with its’ mixed reality AR, VR and 3D lessons, gives students an understanding of what goes on behind the scenes in logistics & warehousing to get the latest gadget delivered to your door.
It is designed for classroom use and is easy to clean, durable and folds away neatly without creasing.
Included with this mat is a matching virtual warehouse environment that you can view in either:
3D with your Chrome, Safari or Edge browser
Augmented Reality with a compatible Android or iOS device
Virtual Reality with a compatible Android or iOS device
Included with the mat are several lessons and simulations in e-commerce fulfilment warehouses. Students simulate full cycles of automated picking of items, similar to those found in Amazon and Alibaba warehouses.
This high-quality neoprene mat is designed for classroom use. It is easy to clean, durable, and folds away neatly without creasing.
Mat Size - 980mm x 980mmGrid size - 800mm x 800mmMaterial - Neoprene – machine washable
Kai's Clan Mars Discovery AR VR Adventure Mat
$719.00 ex GST
($790.90 inc GST)
Included with this Mars Discovery AR VR Adventure Mat are exciting virtual Mars activities where students work together in planning missions, simulating the environment, graphing sensor IoT data, and risk factor role play, using their rovers to traverse the red planet.
It is designed for classroom use and is easy to clean, durable and folds away neatly without creasing.
Included with this mat is a matching virtual martian environment that you can view in either:
3D with your Chrome, Safari or Edge browser
Augmented Reality with a compatible Android or iOS device
Virtual Reality with a compatible Android or iOS device
This Kai’s Clan AR VR Adventure mat gives you access to exclusive Kai’s Clan Mars Discovery lesson plans & activities, a digital 3D view of the coding environment, augmented reality, and virtual reality!
This high-quality neoprene mat is designed for classroom use. It is easy to clean, durable, and folds away neatly without creasing.
Mat Size - 980mm x 980mmGrid size - 800mm x 800mmMaterial - Neoprene – machine washable
Kai's Clan Rescue Run AR VR Adventure Mat
$719.00 ex GST
($790.90 inc GST)
An exciting tower defence stylised mat for game-based learning that encourages computational & scientific thinking. Enjoy action-packed activities like Capture the Flag, guaranteed to keep you on the edge of your seat!
It is designed for classroom use and is easy to clean, durable and folds away neatly without creasing.
Included with this mat is a matching virtual knights & dragons environment that you can view in either:
3D with your Chrome, Safari or Edge browser
Augmented Reality with a compatible Android or iOS device
Virtual Reality with a compatible Android or iOS device
This Kai’s Clan AR VR Adventure mat gives you access to exclusive Rescue Run lesson plans & activities, a digital 3D view of the coding environment, augmented reality, and virtual reality!
This high-quality neoprene mat is designed for classroom use. It is easy to clean, durable, and folds away neatly without creasing.
Mat Size - 980mm x 980mmGrid size - 800mm x 800mmMaterial - Neoprene – machine washable
Kai's Clan Booster Bots (4 pack)
$449.00 ex GST
($493.90 inc GST)
Kai's Clan Booster Bots Pack provides an 4 extra robots for your students.
Kai's Clan Booster Bots Pack provides an 4 extra robots for your students. Each mat ideally supports 4-6 Kai robots and students can also use Kai robots off the mat.
Note: Requires either Kai’s Clan Start 4 pack or Kai’s Clan Classroom 12 pack
What's included
4x Kai Robots (rechargeable batteries included – 4 hrs play with 1 hr fast charge time)
4-way USB Charging Cable
QR Sticker Pack
Kai's Clan Classroom Pack (12 pack)
$2,949.00 ex GST
($3,243.90 inc GST)
Mars Discovery & Automated Warehouse AR & VR Adventure Mat with rovers and forklifts!
Kai’s Clan is so much more than just a yellow robot! The difference is the collaboration between schools or countries, it’s not just about talking on Skype it's actually about manipulating each other’s world in the virtual.
It teaches us to do the learning together and finding solutions to real-world activities and challenges, things that excite kids.
Make AR / VR worlds in your classroom
Easily build 3D environments using Minecraft or Tinkercad
Kai’s Clan’s latest feature allows students to create their own characters in Tinkercad or Minecraft. Used for storytelling, you can create your Minecraft hero and when you code your robot to move around, your 3D avatar also moves around your virtual world. It allows you to create your own 3D environments, code them, and then view them in AR or VR.
Multiplayer coding
Make coding a team sport
Students work together to solve real-world problems, whether within the same classroom or with someone on the other side of the world, using multiplayer Scratch/Blockly coding.
Virtual Reality
Create interactive virtual environments
Let your students create & jump into the driver’s seat of a rover on Mars, a forklift in a busy warehouse, or the pilot’s seat in a plane high over a thriving metropolis.
Expand what is possible in the classroom
Make, create and enrich your student’s learning with Kai’s Augmented Reality. See your code come to life in an interactive learning playground.
What's included
12x Kai Robots (rechargeable batteries included – 4 hrs play with 1 hr fast charge time)
1x Mars Discovery AR VR Adventure Mats (1 x 1 meter tough & durable neoprene)
1x Automated Warehouse AR VR Adventure Mats (1 x 1 meter tough & durable neoprene)
2x Smartphone Tripod (smartphone for tracking robots not included)
Large Kai Bit Sensor Pack
2 x 4-way USB Charging Cable
Sticker Pack
Kai’s Coding Cards Packs
Quick Start Guide
Various spare parts
Kai’s Eye Robot Tracker app available for download in the Google Play or Apple App stores.
Kai’s AR VR Virtual Viewer app available for download in the Google Play or Apple App stores.
Plus includes over 35 education lesson plans
Blue-Bot/Rugged Robot Programming TacTile Reader
$253.64 ex GST
($279.00 inc GST)
Blue-Bot/Rugged Robot Programming TacTile Reader - A unique and extremely fun way to program Blue-Bot or Rugged Robot, place your instructions on the tile reader, press go and see Blue-Bot/Rugged Robot complete the program!
The tiles can be placed either portrait or landscape depending on how the child wants to lay out their program and if they want to debug their program, simply swap the tiles and press 'go' to try their program again. Connecting to a Blue-Bot/Rugged Robot couldn't be easier, turn Blue-Bot/Rugged Robot on, press connect on the Reader and wait for Blue-Bot's eyes to go blue to show it is connected!
Key features
Bluetooth connectivity
10 position slots
Rechargeable
Speaker for audible feedback
Connect up to three units together
25 TacTiles included
Compatible with both Standard and Extension tiles
Physically correct sequences and algorithms.
Blue-Bot TacTile Reader Tiles Extension Pack
$108.18 ex GST
($119.00 inc GST)
Blue-Bot/Rugged Robot TacTile Reader Tiles Extension Pack introduces extra functionality to the standard pack including 45° turns and repeats.
Using these, children can program Blue-Bot or Rugged Robot using the Blue-Bot/Rugged Robot Programming TacTile Reader to explore geometry and also create efficient algorithms.
Product Content
45° Left x 4
45° Right x 4
Repeat start x 3
2x Repeat x 2
2x Repeat x 1
4x Repeat x 2
6x Repeat x 2
8x Repeat x 2
Repeat end x 3
Pause x 2
Blue-Bot/Rugged Robot TacTile Reader Standard Tile Pack
$99.09 ex GST
($109.00 inc GST)
Blue-Bot/Rugged Robot TacTile Reader Standard Tile Pack - If you need to replace some TacTiles for the Blue-Bot/Rugged Robot Programming TacTile Reader or you just want to have a larger selection, this pack is perfect!
Contents
Forwards x 8
Backwards x 8
Left (90°) x 4
Right (90°) x 4
Pause x 1
Ozobot Bit+ Solar System STEAM Kit
$227.27 ex GST
$237.95 ex GST ($250.00 inc GST)
$237.95 ex GST ($250.00 inc GST)
The Ozobot Bit+ Solar System STEAM Kit pairs a Bit+ coding robot with two hands-on space activity sets, so students learn to code and explore astronomy at the same time. They program their robot to travel between the planets, model the solar system and investigate how the Sun, Earth and Moon move — a screen-free, tactile way into both coding and science that suits schools, homeschool and after-school programs.
The kit brings together three Ozobot products in one: a single-robot Bit+ Entry Kit plus the OzoGoes to the Solar System and OzoGoes to the Sun, Earth & Moon activity sets. Students code the Bit+ with screen-free Colour Codes — coloured marker patterns the robot reads and follows — then can progress to OzoBlockly block coding as their skills grow.
What's included:
1 Ozobot Bit+ Entry Kit — one Bit+ coding robot, dual-tip Colour Code markers, charging cable and Get Started activities
OzoGoes to the Solar System activity set — build the planets and code your robot's orbits
OzoGoes to the Sun, Earth & Moon activity set — model day and night, the seasons and the Moon's phases
Free access to standards-aligned STEAM lessons in Ozobot Classroom
What your students practise:
Space science — planetary order and attributes, rotation versus revolution, and how the Sun and Moon shape life on Earth
Coding fundamentals — sequencing, loops and debugging with Colour Codes
Problem-solving, critical thinking and teamwork through hands-on projects
The activities are ready to teach and aligned to curriculum standards, and each set suits an individual or a small group of up to four students. Recommended for ages 8 and up. Kitting out a whole class? See the Ozobot Bit+ Classroom Kit, or add more OzoGoes STEAM kits from our curriculum range.
Ozobot Evo Kit of 5 with Charger
$1,453.64 ex GST
$1,599.95 ex GST ($1,599.00 inc GST)
$1,599.95 ex GST ($1,599.00 inc GST)
The Ozobot Evo Kit of 5 with Charger puts five palm-sized Evo coding robots and a multi-port charging hub in one box — an easy way to set up a small-group coding station at school or home. Charge and store all five robots together between lessons, so they're ready to go when your students are, with no coding experience needed to get started.
Evo gives every learner two ways to code. They begin screen-free with Colour Codes — drawing coloured marker patterns that Evo reads and follows to speed up, spin, change direction and more — then progress to OzoBlockly, dragging and dropping blocks through five skill levels, from pre-reader to master.
What's included:
5 Ozobot Evo coding robots
1 multi-port USB charging hub (charges all five at once)
5 sets of dual-tip Colour Code markers and 5 protective zip cases
Get Started activities
Free access to Ozobot Classroom — 700+ standards-aligned lessons across coding, maths, science and more
What your students practise:
Sequencing, loops and debugging through hands-on challenges
Problem-solving and computational thinking
Collaboration and turn-taking while sharing robots in a group
Creativity — drawing their own colour-code tracks, mazes and racetracks
Each Evo is built for everyday use, with a tough polycarbonate shell, proximity and optical sensors, LED lights, a built-in speaker and a rechargeable battery. Recommended for primary-aged learners. Need enough robots for a whole class? See the Ozobot Evo Classroom Kit for 12-robot and 18-robot options.
New to OzoBlockly? Read our OzoBlockly guide to see how the five skill levels work and which editor suits your robot.
Ozobot Bit+ Kit of 10 with 2 Chargers
$1,226.36 ex GST
$1,299.86 ex GST ($1,349.00 inc GST)
$1,299.86 ex GST ($1,349.00 inc GST)
The Ozobot Bit+ Kit of 10 with 2 Chargers gives you ten Bit+ coding robots and two charging stations in one box — enough to run several coding stations at once, or to teach a small class working in pairs, with no app and no Bluetooth to manage. The two stations charge and store all ten robots together between lessons, so a flat battery never holds up your session, and no coding experience is needed to get started.
Bit+ gives every learner two ways to code. They begin screen-free with Colour Codes — drawing coloured marker patterns that Bit+ reads with its optical sensors to speed up, slow down, spin and follow paths. From there they move to OzoBlockly block coding in any web browser, loaded straight from the screen, across five skill levels from pre-reader to master.
What's included:
10 Ozobot Bit+ coding robots
2 charging stations that power all ten together
Colour Code markers (a set per robot) and colour code stickers
Get Started activities
Free access to Ozobot Classroom lessons across coding, maths, science and more
What your students practise:
Sequencing, loops and debugging through hands-on challenges
Problem-solving and computational thinking
Collaboration and turn-taking while working in pairs and groups
Creativity — drawing their own colour-code tracks, mazes and racetracks
Each Bit+ is built for everyday classroom use, with a reinforced polycarbonate shell, bright LED lights and a rechargeable battery. It's also Arduino-compatible, so older students can extend it further. Recommended for ages 5 and up, right through primary and secondary. Ready to equip a whole class? See the Ozobot Bit+ Classroom Kit and Bulk Pack.
New to OzoBlockly? Read our OzoBlockly guide to see how the five skill levels work and which editor suits your robot.
Ozobot Bit+ Kit of 5 with Charger
$635.45 ex GST
$759.95 ex GST ($699.00 inc GST)
$759.95 ex GST ($699.00 inc GST)
The Ozobot Bit+ Kit of 5 with Charger puts five Bit+ coding robots and a charging station in one box — an affordable way to set up a small-group coding station at school or home, with no app and no Bluetooth to manage. Charge and store all five robots together between lessons, so they're ready when your students are, and no coding experience is needed to get started.
Bit+ gives every learner two ways to code. They begin screen-free with Colour Codes — drawing coloured marker patterns that Bit+ reads with its optical sensors to speed up, slow down, spin and follow paths. From there they move to OzoBlockly block coding in any web browser, loaded straight from the screen, across five skill levels from pre-reader to master.
What's included:
5 Ozobot Bit+ coding robots
A charging station that powers all five together
Colour Code markers (a set per robot) and colour code stickers
Get Started activities
Free access to Ozobot Classroom lessons across coding, maths, science and more
What your students practise:
Sequencing, loops and debugging through hands-on challenges
Problem-solving and computational thinking
Collaboration and turn-taking while sharing robots in a group
Creativity — drawing their own colour-code tracks, mazes and racetracks
Each Bit+ is built for everyday use, with a reinforced polycarbonate shell, bright LED lights and a rechargeable battery. It's also Arduino-compatible, so older students can extend it further. Recommended for ages 5 and up, right through primary and secondary. Ready to equip a whole class? See the Ozobot Bit+ Classroom Kit and Bulk Pack.
New to OzoBlockly? Read our OzoBlockly guide to see how the five skill levels work and which editor suits your robot.
Edison EdSketch Pack
$38.63 ex GST
($42.49 inc GST)
The Edison EdSketch Pack brings art into coding, turning your Edison robot into a drawing machine. It's a simple, engaging way to add a creative, STEAM angle to programming lessons.
What's included:
10 × EdSketch pen holders that clip onto an Edison robot
10 × dry-erase marker pens that work on whiteboards and paper
What your child practises:
Programming the robot to drive precise paths — squares, circles and patterns
Linking maths and coding through angles, distance and repetition
Creativity, designing their own robot-drawn artwork
This is an add-on pack, so an Edison robot isn't included. Markers wipe clean from whiteboards for repeat use. Australian-owned, shipped from Australia, with purchase orders welcome for schools.
Edison EdSketch Marker Pens
$19.95 ex GST
($21.95 inc GST)
The Edison EdSketch Marker Pens are the colour refill set for EdSketch drawing activities. Made to slot straight into the EdSketch pen holder, they let your Edison robot draw in a full range of colours.
Features:
10 dry-erase markers in 10 colours — red, purple, pink, yellow, light and dark blue, light and dark green, orange and black
Work cleanly on both whiteboards and paper
Sized to fit the EdSketch pen holder
Good to know: this is a pen-only pack — the Edison robot and the EdSketch pen holders aren't included, and can be bought separately. Australian-owned and shipped from Australia, with purchase orders welcome for schools.
Edison Spare Parts Kit — V1 & V2 Robots
$20.86 ex GST
($22.95 inc GST)
The Edison Spare Parts Kit keeps older Edison robots running when a part goes missing or wears out — handy for classrooms where robots get plenty of use. This kit covers the removable parts of Edison V1 and V2 robots.
What's included:
1 × EdComm programming cable
1 × battery door (with springs)
3 × clear skids, 2 × wheels and 2 × tyres
A 'Tune up Your Edison' guide with step-by-step instructions
Dimensions: 7.7 × 8.8 × 2 cm. Please note this kit is for Edison V1 and V2 robots — the V3 uses a rechargeable battery and a built-in USB cable, so it needs different spares. Australian-owned, with purchase orders welcome for schools.
Edison EdCharger — Charges 5 V3 Robots
$63.59 ex GST
($69.95 inc GST)
The Edison EdCharger keeps a set of robots powered and organised between lessons. It charges and stores up to five Edison V3 robots at once, so a class set is always ready to go.
Features:
Charges up to 5 Edison V3 robots at the same time
Runs from any USB-A socket (power adapter not included)
Doubles as a tidy storage dock when robots aren't in use
Designed specifically for the Edison V3 robot
A practical bit of kit for any classroom running multiple Edison robots — pair one EdCharger with every five robots. Australian-owned and shipped from Australia, with purchase orders welcome for schools.
Rugged Robot Activity Book
$62.73 ex GST
($69.00 inc GST)
Written by an experienced teacher of Computer Science, this 68 page book hopes to inspire big projects in your classroom with Rugged Robot.
Whether you have one Rugged Robot or a class set, this book hopes to inspire your computer science lessons whilst saving you significant planning time. Contains 7 lessons worth of photocopiable activities.
Focusing on delivering cross curricular lessons, this book includes lesson plans and resources to help deliver KS2 computer science lessons whilst developing your learner’s computational thinking skills. The book includes 7 fully resourced lessons which include topics from the Apollo 11 moon landing to Coral Reef preservation.
Rugged Robot Coral Reef Mat
$80.91 ex GST
($89.00 inc GST)
Take Rugged Robot for a swim in the coral reef using this 120cm x 120cm mat.
Providing excellent cross curricular links, this mat includes a variety of coral fish, examples of coral bleaching and a broken ship mast which links to the Treasure Island mat.
Supported by lesson ideas in our Rugged Robot Computational Thinking Textbook, the Coral Reef mat can be used in a variety of different ways. Why not litter the reef with old plastics? How long will different types of rubbish take to biodegrade? Can you program Rugged to collect up the rubbish in the coral?
Rugged Robot Construction site Mat
$80.91 ex GST
($89.00 inc GST)
This mat is designed to engage students in programming and construction at the same time!
Can you take the rubble to the skip? Take the workman to the digger?
Rugged Robot Lunar Mat
$80.91 ex GST
($89.00 inc GST)
Program Rugged Robot to navigate through a Lunar Landscape!
A 120 cm x 120 cm mat designed to be used with the Rugged Robot. Ideal for when you want to use Rugged robot indoors!
Rugged Robot Class Kit
$3,135.45 ex GST
$3,365.37 ex GST ($3,449.00 inc GST)
$3,365.37 ex GST ($3,449.00 inc GST)
FREE SHIPPING ON THIS CLASS PACK
Take coding outside with the Rugged Robot Class Kit — everything your class needs to get hands-on with outdoor programming! 🤖🎒
This ready-to-go classroom set includes 4 x Rugged Robots and 4 x TTS TacTile Code Readers, giving groups of students the tools to collaborate, problem-solve, and code — inside or out.
What's included:
4 x Rugged Robots
4 x Tactile Readers
4x TacTile Standard Packs
2x Tactile Extension Packs
3x Rugged Robot Activity Mat (style varies based on available stock)
1x Rugged Robot Activity Book
1x Rugged Robot Camera Adapter
1x 6-Port USB Charging Hub
Key features:
🌦️ Designed for outdoor use — rugged, durable, and ready for real-world challenges
📱 Bluetooth enabled — works with tablets, iPads, or TacTile Readers for screen-free coding
🧠 256-step memory — tackle complex, multi-step programming sequences
⚡ 3 adjustable speeds — students set the pace to match their challenge
🚧 Obstacle sensor — detects and avoids objects; toggle on/off to scaffold complexity
🔋 USB rechargeable — ~3 hours to charge, ~1 hour battery life per robot
Perfect for primary schools looking to bring coding to life beyond the classroom walls. Rugged Robot is curriculum-aligned to Australian Curriculum v9 and supports both on-screen and unplugged coding activities — making it a versatile choice for any STEAM programme.
✅ FREE SHIPPING on this class kit✅ Purchase orders welcome✅ Ships direct from Australian warehouses 🇦🇺
Sphero indi Code Mat & Literacy Cards
$318.17 ex GST
($349.99 inc GST)
Sphero indi Code Mat & Literacy Cards - Unlock Screenless Learning
Discover the wonders of coding and literacy without the need for a screen with the Sphero indi Code Mat & Literacy Cards. Designed to support the Early Learning and ELA curriculum, this innovative educational tool is perfect for fostering creativity, problem-solving, and foundational literacy skills in young learners. Dive into indi Land on one side and explore various literacy concepts, or flip over for a blank grid that promotes hands-on programming with indi colour tiles. Ideal for schools and educational institutions, this kit is backed by exceptional support and is a proud recipient of the 2024 "Enhanced Curriculum Innovation Award."
Major Features:
Double-Sided Interactive Coding Mat: One side features indi Land with eight locations tied to literacy concepts, while the other is a blank grid for custom programming tasks.
Accompanying Literacy Cards: Includes 168 letters and images and 114 words, supporting objectives like letter identification, word formation, and sentence construction.
Supports ELA Curriculum: Aligned with WIDA and CCSS standards for a comprehensive educational experience.
Screenless Learning: Offers endless opportunities for exploratory learning without the need for digital screens, encouraging physical interaction.
Award-Winning Educational Tool: Honored with the 2024 "Enhanced Curriculum Innovation Award" from the EdTech Breakthrough Awards program.
For recommended lessons take a look at our free indi Land guide.
What's included:
1 x double-sided indi Code Mat (150 cm long x 116 cm wide)
1 x literacy card set with 168 letters and images
1 x literacy card set with 114 words
NOTE: Sphero indi sold separately
Sphero RVR+ Blueprint Plate
$36.35 ex GST
($39.99 inc GST)
Maximise learning with the Sphero RVR+ Blueprint Plate, an ideal tool for elevating programming skills and diving into mechanical engineering. The Blueprint Plate allows for seamless integration of Blueprint Build creations onto the mobile RVR+ platform, sparking students' creativity with digital challenges. This hands-on experience fosters practical skills in both mechanical engineering and programming, encouraging collaboration as students bring their Blueprint Build creations to life.
Key Features:
Hands-On Learning: Through the RVR+ Blueprint plate, students can gain hands-on experience in both mechanical engineering and programming.
Easy Prototyping: The mechanical parts and electrical bits are easy to assemble and disassemble, making it perfect for rapid prototyping.
Educational Guides: The product comes with 100+ hours of in-depth, standards-aligned lessons and unit plans, including over 30 guided builds and 2 Educator Guides.
Collaborative Learning: Encourages students to work together to tackle challenges and bring their Blueprint Build creations to life.
Australian Quality: Proudly Australian owned, we deliver high-quality products directly from our suppliers' warehouses in Australia.
Why Robotics Matters in Education
In today’s education landscape, robotics is far more than toys — it’s a teaching tool that empowers learners to explore science, coding, math and engineering concepts in a fun and practical way. Robotics activities encourage logical reasoning, iterative design thinking and collaboration, preparing students for future digital careers.
Expect improved outcomes in:
Computational thinking
Algorithmic logic
Teamwork and collaboration
Creative problem-solving
Hands-on engineering experience
Programmable Classroom Robots
Our range includes app-enabled and programmable robots such as Sphero robotic balls and mobile robots that support beginner to advanced coding levels.
Popular options include:
Sphero BOLT+ Power Pack — complete classroom set with charging case and curriculum-aligned activities.
Sphero Mini — compact robot balls ideal for introductory coding and STEAM activities.
Each kit includes access to learning pathways that integrate coding with design thinking, puzzle solving, game-based challenges and teacher-ready lesson plans.
Floor & Early Learning Robots
Robots like Bee-Bot and Blue-Bot are especially well-suited to younger learners, using directional buttons and visual sequencing to introduce foundational programming concepts.
They’re perfect for:
Early years classrooms
Storytelling and sequencing activities
Cross-curriculum numeracy tasks
Edison & Expandable Robotics
For a scaffolded approach to STEM, Edison robots and their activity mats let learners explore robotics basics up to complex internal logic.
Engaging physical mats and barcode programming introduce students to coding without screens and transition to drag-and-drop and text-based languages like EdBlocks and EdPy as their skills grow.
Classroom Bundles & Swarm Packs
Bundled sets such as Bee-Bot Swarm and Blue-Bot Swarm deliver multiple units and docking stations, enabling group projects and collaborative classroom challenges — perfect for differentiated learning.
FREE Shipping Australia Wide!
Sphero BOLT+ Power Pack — 15 Robots
$5,170.00 ex GST
$5,454.54 ex GST ($5,687.00 inc GST)
$5,454.54 ex GST ($5,687.00 inc GST)
FREE Shipping on this Product!
The Sphero BOLT+ Power Pack is a complete, classroom-ready set of 15 Sphero BOLT+ coding robots — enough for up to 30 students working in pairs. It's the simplest way to bring hands-on coding and STEM to a whole class, with every robot charged, organised and ready to go in one carry case.
What's included:
15 × Sphero BOLT+ robots (supports up to 30 students, two per robot)
Charging case with inductive charging cradles and a retractable handle
Educator Guide and 20 Challenge Cards
15 protractors, 15 Turbo covers, maze tape and sticker sheets
Free, standards-aligned lessons and teacher guides in Sphero Central
What students practise:
Coding three ways — Draw, Blocks and Text (JavaScript and Python)
Computational thinking, debugging and collaborative problem-solving
Reading real-time data on each robot's 128×128 LCD screen
Cross-curricular projects across maths, science and literacy
Designed for busy classrooms: durable, waterproof robots, "Shake to Wake" and wireless charging for quick set-up, and all-day battery life so a full lesson runs without interruption. Ideal for Years 3–10, robotics clubs and library makerspaces.
Sphero indi Class Pack — 8 Robots
$2,362.73 ex GST
$2,454.54 ex GST ($2,599.00 inc GST)
$2,454.54 ex GST ($2,599.00 inc GST)
FREE Shipping on this product!
The Sphero indi Class Pack brings screen-free coding to a whole class of early learners. indi is driven by colour — children lay out coloured tiles to build a path, and each robot's on-board colour sensor turns the colours into actions, teaching computational thinking and problem-solving with no screens and no reading required. A simple, playful way to start coding across Pre-K to Year 2.
What's included:
8 indi robots and 8 durable student carry cases
160 durable silicone colour tiles (20 per student)
Charging case (charges all 8 robots), classroom tote and 8 charging cables
8 sets of 15 Beginner's Programming Challenge Cards
indi Educator Guide with standards-aligned lesson plans
What students practise:
Computational thinking — sequencing, pattern recognition and cause and effect
Problem-solving by designing and testing their own mazes
Early literacy and maths through cross-curricular, play-based activities
Optional block coding in the free Sphero Edu Jr app as skills grow
Everything a teacher needs to get a class started, with durable kit built for busy classrooms. Australian-owned and teacher-run, with local stock, expert support and purchase orders welcome — and free shipping on this pack.
Bee-Bot Swarm 6-Pack + Docking Station
$771.82 ex GST
($849.00 inc GST)
The Bee-Bot Swarm is a classroom-ready set of six rechargeable programmable floor robots — enough for a whole group of early learners to explore coding and directional language at the same time. Children plan a route, enter a sequence of directions, then watch their program play out step by step.
What's included:
6 × rechargeable Bee-Bot robots (current "See & Say" model, with recordable audio)
1 × Bee-Bot Docking Station that charges up to 6 robots at once — no loose batteries to chase between lessons
Each robot moves in 15cm steps and 90° turns and remembers up to 200 steps
12-month warranty on every item
What children practise:
Early sequencing and step-by-step logical thinking
Directional and positional language — forward, back, left, right
Problem-solving, estimation and simple debugging
Turn-taking and communication through group activities
A sturdy, refill-free set built for shared use across a class or between classrooms. Pair it with the full range of Bee-Bot mats and accessories as children's confidence grows.
Blue-Bot Swarm — Class Pack of 6 + Docking Station
$1,177.27 ex GST
($1,295.00 inc GST)
The Blue-Bot Swarm brings coding to life for a whole class at once. With six rechargeable Blue-Bot floor robots and a charging dock, students build a sequence of instructions, press go and watch their program play out step by step — a hands-on, screen-free introduction to computational thinking.
Children can program each robot straight from its on-board buttons, or connect the free iOS or Android app to build more advanced sequences. It's also compatible with the TacTile Code Reader (not included) for tactile, screen-free coding.
What's included:
6 × Blue-Bot rechargeable floor robots
1 × rechargeable docking station that charges all six at once
Suitable for ages 6 and up
What students practise:
Writing, testing and debugging simple programs
Logical reasoning — predicting what the robot will do before pressing go
Breaking a bigger task into smaller steps
Sequencing movements, and thinking about direction and space
Because the docking station keeps every robot charged, there's no hunting for batteries between lessons — just pick them up and teach. TTS also continues to update the companion app for three years after a product is discontinued, so a class set keeps earning its place in your room.
Ozobot Evo Classroom Kit (18 Bots)
$4,362.73 ex GST
$5,450.00 ex GST ($4,799.00 inc GST)
$5,450.00 ex GST ($4,799.00 inc GST)
FREE SHIPPING ON THIS PRODUCT!
The Ozobot Evo coding robot gives a whole class a hands-on way into coding — with no prior experience needed, for you or your students. This classroom kit puts 18 palm-sized Evo robots in students' hands, so a full class can code in pairs and watch their ideas come to life on the desk in front of them. It's a practical way to bring coding, problem-solving and STEM thinking into primary classrooms across Australia.
Evo offers two ways to code, so every student has a starting point. Beginners code screen-free with Colour Codes — drawing coloured marker patterns on paper that Evo reads and follows. From there, students progress to OzoBlockly drag-and-drop block coding, and on towards text-based coding as their confidence grows.
What's included:
18 Ozobot Evo robots and 18 dual-tip Colour Code marker sets
Wireless charging cradle and power cable
Bot label stickers and an Ozobot sticker pack
Get Started activities for educators
Free Ozobot Classroom account — teacher training plus hundreds of standards-aligned lessons
What your students practise:
Sequencing, loops and debugging through hands-on challenges
Problem-solving and computational thinking
Maths, science and literacy through cross-curriculum lessons
Collaboration and communication while working in pairs
Each Evo is built for daily classroom use, with a tough polycarbonate shell and a rechargeable battery that lasts a full lesson and recharges in about an hour. With enough robots for the whole class and ready-to-teach lessons included, it's a coding tool you can pick up and use from day one.
New to OzoBlockly? Read our OzoBlockly guide to see how the five skill levels work and which editor suits your robot.
Makey Makey STEM Pack — Class Set of 12
$1,408.18 ex GST
($1,549.00 inc GST)
Set up a whole makerspace at once. The Makey Makey STEM Pack — the Classroom Invention Literacy Kit — gives a class enough hardware to work in pairs, turning everyday objects into touchpads so students can explore circuits, conductivity and coding together. Designed for schools, it arrives sorted in a sturdy briefcase, ready to teach.
What's included:
12 Makey Makey Classic boards, each in its own box with a USB cable, 7 alligator clips and a how-to booklet
12 six-foot alligator clip sets and 12 six-foot connector wires
72 extra alligator clips and 144 connector wires for the back-of-board inputs
12 Makey Makey conductive 6B pencils
Sturdy briefcase organiser
Suitable for ages 8 and up
What students practise:
Core STEM ideas — closed circuits, conductivity and cause and effect
Creative problem-solving and design thinking, working in pairs or small groups
A hands-on bridge into coding with Scratch and MakeCode
Collaboration and communication across a whole class
Enough kit to keep around 60 students inventing in pairs, with everything organised in one grab-and-go case. Prefer to start smaller? See the single Makey Makey Classic. Schools and TAFEs are welcome to order on account — choose Purchase Order at checkout, or request a quote for bulk orders.
Browse the full Makey Makey range →
Sphero RVR+ Multi-Pack
$2,727.26 ex GST
($2,999.99 inc GST)
FREE Shipping on this Product
The RVR+ Multi-Pack brings Sphero’s revolutionary take on the programmable robot to the entire class with 6 RVR+ robots and RVR+ Educator Guide. They’re drivable right out of the box, packed with a diverse suite of sensors, and built for customization. RVR+ is expandable and made for novice to advanced programmers in 6th–12th grades.
Features
ENGAGE THE ENTIRE CLASS - Engage up to 18 students with 6 RVR+ robots and accessories. Supplement the Multi-Pack with individual RVR+ robots to accommodate more students.
TEACH WITH CONFIDENCE - The RVR+ Educator Guide contains tips for successful rollout of RVR+ in your classroom as well as activities.
ENDLESS CLASSROOM POSSIBILITIES - The free Sphero Edu app contains hundreds of lessons to teach coding and computer science with RVR+, and advanced programmers can level up with the Public Sphero SDK and connect third-party hardware capabilities with Python.
EXPANDABLE PLATFORM - RVR+ features a 4-pin UART and an onboard power source, allowing students to connect and run third-party hardware like a Raspberry Pi, BBC micro:bit, or Sphero's very own littleBits. RVR+ allows your inventions and mobile projects to go even further with an advanced colour sensor and an enhanced gearbox giving more torque and providing the flexibility to program RVR+ to do whatever you can imagine.
What’s in the Sphero RVR+ Multi-Pack box?
6 RVR+ programmable robots
1 RVR+ Educator Guide
6 removable and rechargeable batteries
6 removable, protective roll cages
6 expansion mounting plates
6 USB-A to USB-C charging cables
6 sets of colour cards
1 getting started card
1 quick start guide
Sphero Mini Education 16 Pack (V2.0)
$2,080.00 ex GST
$2,272.72 ex GST ($2,288.00 inc GST)
$2,272.72 ex GST ($2,288.00 inc GST)
FREE SHIPPING ON THIS PRODUCT!
The Sphero Mini Education 16 Pack gives a whole primary class the chance to learn to code through hands-on play. Each student gets their own app-enabled robot ball — about the size of a ping pong ball — to drive, program and problem-solve with, building real STEM and computer science skills from the very first lesson.
What's included:
16 clear Sphero Mini robots (V2.0), each with its own accessories and cards packaged 1:1
16 robotic ball covers, plus 16 sets of 6 bowling pins and 3 traffic cones
16 construction sets and 16 sets of 15 activity cards
16 splitter USB charging cables
Free Sphero Edu app (Chrome, Mac, PC, iOS, Android, Kindle) plus the Sphero Play app
What your students practise:
Coding across three levels — Draw, block-based coding, then text with Python and JavaScript in the Sphero Edu app
Computational thinking — sequencing, testing and debugging as they set paths and challenges
Cross-curricular STEAM — activities that link to maths, science and English
Collaboration and fine motor control through games, mazes and robot races
Built for real classrooms: the 1:1 packaging makes it easy to run individual, hybrid or send-home lessons, and each Mini packs a gyroscope, accelerometer, motor encoders and a bright LED into a tabletop-friendly size. Adult supervision is required for children under eight, as each shell opens to reveal small parts.
More great STEAM Products from Sammat Education
