Products

102

littleBits Split $29.95 ex GST

The littleBits split module sends a single input to two wired outputs. It's great for connecting one output to two inputs, like using a keyboard to control two oscillators. But keep in mind that it can be used just like a wire module if you ignore one of its outputs.

littleBits STEAM Student Set - International Kit $544.55 ex GST

Meet the electronics kit designed to teach STEAM principles and encourage exploration, experimentation, and creativity through hands-on learning. Developed with educators, the STEAM Student Set makes the engineering design process fun and iterative for students while giving you everything you need to easily implement 20+ hours of standards-aligned curriculum in the classroom. Unpack the STEAM Student Set and transform students into inventors! Engage up to 3 students per kit with 19 bits and 46 accessories Run 20+ hours unplugged/no device required cross-curricular and standards-aligned lessons available on littleBits Classroom Open and guided STEAM challenges on littleBits Classroom that foster creative problem-solving skills and encourage self-expression and reflection Included Invention Guide containing Bit tips and 8 step-by-step challenges to get started Improved durable storage container for easy organisation and clean up & printed materials for instructional support and classroom implementation What’s in Sphero littleBits STEAM Student Set circuit kit? 1 power 1 USB power 1 button 1 slide dimmer 1 light sensor 1 temperature sensor 1 pulse 1 fork 2 wires 1 inverter 1 number 1 long LED 1 RGB LED 2 DC motors 1 servo & hub 1 buzzer 1 fan 1 Durable Storage Carrying Case Plus, access to littleBits classroom

littlebits steam education class pack - international

littleBits STEAM Student Set Class Pack - International $5,450.00 ex GST

Unleash student creativity with the littleBits STEAM Student Set Class Pack! Developed with educators, this electronics kit is designed to teach STEAM principles and encourage exploration, experimentation, and hands-on learning. With 10 littleBits STEAM Student Sets and 20+ hours of standards-aligned curriculum, the STEAM Student Set Class Pack enables students to practice the engineering design process in an approachable and hands-on way. Each kit serves up to 3 students and is best suited for grades 3-8. STEAM Student Set Key Features COLLABORATIVE LEARNING: Each kit contains 19 Bits and 46 accessories to engage up to 3 students and foster teamwork, communication, and collaboration skills. STANDARDS-ALIGNED: The STEAM Student Set includes 20+ hours of cross-curricular and standards-aligned lessons available on littleBits Classroom, giving educators everything they need to easily implement the kit in their classroom. Students learn fundamental concepts such as circuitry, engineering, physics, art, and design thinking. OPEN & GUIDED CHALLENGES: Find open and guided STEAM challenges on littleBits Classroom, encouraging creative problem-solving skills, self-expression, and reflection. INVENTION GUIDE: The included Invention Guide contains Bit tips and 8 step-by-step challenges to get students started. DURABLE STORAGE: The STEAM Student Set comes with individual durable storage containers for easy organisation and clean up, as well as printed materials for instructional support and classroom implementation. What's in the Bundle Power x10 USB Power x10 Button x10 Slide Dimmer x10 Light Sensor x10 Temperature Sensor x10 Pulse x10 Fork x10 Wires x10 Inverter x10 Number x10 Long LED x10 RGB LED x10 DC Motors x20 Servo & Hub x10 Buzzer x10 Fan x10 Durable Storage x10 Invention Guide Invention Log Teacher's Guide

littleBits STEAM+ Coding Class Pack - International $7,995.45 ex GST

The littleBits STEAM+ Class Pack is an all-in-one coding and engineering educational solution designed to inspire and engage students grades 3–8 in STEAM learning. This comprehensive kit includes 10 individualized sets with storage, a comprehensive Invention Guide, and over 40 hours of standards-aligned STEAM curriculum to fuel critical thinking, problem-solving, and teamwork through hands-on activities and projects. In the free Fuse app, students can level up the learning experience by programming littleBits inventions with the codeBit and simulating circuits. STEAM+ Class Pack Key Features ENGAGES UP TO 40 STUDENTS: The littleBits STEAM+ Class Pack is designed to engage up to 40 students, making it an ideal solution for classrooms or other educational settings. OVER 40 HOURS OF CURRICULUM: With more than 40 hours of standards-aligned STEAM lessons and activities, educators can easily integrate the littleBits STEAM+ Class Pack into their existing curriculum. Students practice their programming skills with—a virtual circuit builder and programming platform when used with the included codeBit. INNOVATIVE MODULAR DESIGN: The littleBits STEAM+ Class Pack features a unique, colour-coded modular system that allows students to explore electronics, coding, and engineering concepts in an intuitive, engaging manner. SUPPORTS COLLABORATION: The Class Pack includes 10 individual kits, each designed to support multiple students, encouraging teamwork, communication, and collaboration as students work together to create innovative solutions to challenges and projects. EASY ORGANISATION AND STORAGE: Built-in storage makes it simple to keep the littleBits components organised and portable, ensuring that students can focus on learning and exploration without the hassle of clutter or lost components. NOTE: The previous square LED matrix has been replaced by a round matrix. Some images on this page may still contain the square matrix. What's in the Pack? Bits 20x button 10x temperature sensor 10x long LED 10x buzzer 10x cross axle servo 10x USB power 20x wire 10x pressure sensor 10x speaker 10x square LED matrix 10x codeBit 10x light sensor 10x power 20x cross axle DC motor 10x pulse 10x fork 10x slide dimmer 10x fan 10x inverter 10x number 10x RGB LED 10x bargraph Accessories 10x Rechargeable batteries 20x powerSnap 10x USB cable, 1.5mm 10x USB cable, 0.5mm Magnet BitShoes Hook and Loop BitShoes Twist Ties 10x 9V batteries + Cable 10x XL mounting boards 10x USB Power Adapter + Cable 20x Wheels 30x Mechanical arms 10x Standard Mounting Boards 10x Durable Storage Carrying Cases 100's other accessories

littleBits STEAM+ Coding Expansion Pack $280.91 ex GST

Note: You must already have a STEAM+ Coding Kit or STEAM Student Set in order to use the expansion pack. Power up your STEAM learning with the littleBits STEAM+ Coding Expansion Pack designed to elevate the STEAM+ Coding Kit and STEAM Student Set experience. This expansion pack combines a curated selection of essential Bits and additional accessories from previous littleBits expansion packs that allow you to further supplement what you can teach and learn with the STEAM+ Coding Kit and STEAM Student Set. Additional Unit Plans are also included to easily expand your STEAM curriculum and empower students to take their inventions further. 15 Curated Expansion Bits 7 Additional Accessories Quick Start Guide for easy classroom implementation Additional Unit Plans: Science, Math, Computer Science, and Technology What's Included 1 Power & Cable 1 Sound Trigger 1 Proximity Sensor 1 Threshold 1 Accelerometer 1 Random 1 Wires 1 XOR 1 Makey Makey 2 ANDs 1 OR 1 Split 2 Latchs

littleBits STEAM+ Coding Kit - International $813.64 ex GST

Invent and code with one, easy to use kit. The littleBits STEAM+ Coding Kit contains 25 Bits, a newly designed durable storage container, printed teacher support materials and 40+ hours of standards-aligned STEAM and Coding curriculum. Compatible with the Fuse app, students can program littleBits inventions and simulate circuits to level up the learning experience. Engage up to 4 students per kit with 25 Bits and 34 accessories Run 40+ hours unplugged, cross-curricular lessons and coding tutorials available on littleBits Classroom littleBits Classroom Unit Plans, including STEAM Inventions, Coding Fundamentals, and Engineering Design, are standards-aligned (Grades 3-8) Compatible with the littleBits Fuse app, students of all coding abilities can program the codeBit through blocks or Java-Script text and level up their inventions Improved durable storage container for easy organization and clean up & printed materials for instructional support and classroom implementation NOTE: The previous square LED matrix has been replaced by a round matrix. Some images on this page may still contain the square matrix. What's in the Pack? Bits 2x buttons 1x temperature sensor 1x long LED 1x buzzer 1x cross axle servo 1x USB power 1x pressure sensor 1x speaker 1x square LED matrix 1x codeBit 1x light sensor 1x power 2x cross axle DC motors 1x pulse 1x fork 1x slide dimmer 1x fan 1x inverter 1x number 1x RGB LED 2x wires 1x bargraph Accessories 1x Rechargeable battery 2x powerSnap 1x USB cable, 1.5mm 1x USB cable, 0.5m Magnet BitShoes Hook and Loop BitShoes Twist Ties 1x 9V batteries + Cable 1x USB Power Adapter + Cable 2x wheels 3x mechanical arms 1x standard mounting board 1x XL mounting board 1x Durable Storage Carrying Case Additional accessories

littleBits Synth Speaker $45.41 ex GST

The synth speaker amplifies your sonic explorations! You can control the volume with a dial at the front of the module. It also features an output jack that you can connect to headphones, an amplifier, or a computer. The speaker is connected with 3M™ Dual Lock™ so it can be removed from the circuit board. To reattach, simply press together firmly.

-40% sale

littleBits Tackle Box $55.00 ex GST
$90.86 ex GST

The littleBits tackle box is perfect for stowing Bits away in the workshop, or taking on the go! It has 2 levels of storage and customisable compartment sizes, thanks to the included dividers. It can store 450 Bits in up to 46 compartments.

littleBits Temperature Sensor $36.32 ex GST

The littleBits temperature sensor responds to the temperature surrounding its probe. The higher the temperature it senses, the more signal it sends out. The temperature sensor determines temperature via the IC that is located on top of the board. It communicates via I2C with an MCU located on the bottom of the board. The MCU gets a temperature reading in Celcius, applies a hysteresis to the reading, then converts it to farenheit if necessary. The final determined temperature is converted to a number module readable analog value. Every 50mV on the output of the bitsnap represents a single degree in either Farenheit or Celcius. Since heat will conduct through the board itself, there are slots around around the temperature sensor which provide thermal relief from board conductivity. Not Waterproof: littleBits are not waterproof. Please do not put the temperature sensor in your mouth to take your temperature. Plus, they taste weird so you will wish you hadn’t.

littleBits Threshold $20.86 ex GST

Think of the littleBits threshold as a toll booth for signal passing through your circuit. The threshold compares the incoming voltage coming from the bit snapped before it against the voltage amount you’ve set by the threshold knob. If the incoming voltage value is greater than the selected voltage, the threshold will allow the signal to pass and activate any bits (lights, motors, etc…) following it. If not, then nothing will be activated. Use it to make any sensor module into a trigger module! The threshold is a minimum parts count design, using only a single opamp to accomplish the task of comparing the input signal to an onboard reference that is set via the potentiometer control. U1 is configured as a non-inverting comparator with approximately 100mV of hysteresis provided by R1 and R3. VR1 provides the comparator's reference. C1 is a bypass capacitor for U1 that sources current to the opamp during fast switching events.

littleBits Timeout $21.77 ex GST

The timeout Bit is a settable timer. Try it after a button and follow it with a light. Press and release the button to start the countdown. In "on-off" mode, the light will go on as soon as you release the button and the timer will start counting down to turn-off time. In "off-on" mode, the light will go out when you release the button and will turn back on after the timer reaches the allotted time. Use the included screwdriver to set the timer. Try it with a motion sensor and buzzer to create an intruder alarm!

littleBits Toggle Switch $20.86 ex GST

The toggle switch Bit is sturdy on/off switch that you can use to activate your creations with a nice, solid click. Try using it after a USB power Bit as an on/off switch for your whole creation.

littleBits USB I/O $72.68 ex GST

Now you can record digital audio directly into your computer, or play digital audio from your computer through littleBits modules! Remix music from any audio software (like iTunes, Spotify and GarageBand) Integrate your Synth Kit with common audio workstations (Ableton, ProTools, Audacity, Traktor, Max/MSP) The w27 USB I/O module features 44.1K / 12-bit audio conversion for high quality sound. It is also “DC coupled”, which means that in addition to sending and receiving signals like music, it can also send and receive control voltages. This allows you to use software programs like Max, PD, and CV Toolkit with w27 USB I/O to control littleBits modules by creating “virtual” littleBits modules like sequencers, low frequency oscillators, and much more. You can also control the aforementioned programs with littleBits modules to create hardware controls for your software. The w27 USB I/O module will appear to your computer as an audio interface and its input and output routing can be selected as with any other audio interface. The module can only be selected as either an input or output device at a given time but multiple USB I/O modules can be used at once.

littleBits UV LED $20.86 ex GST

The littleBits UV LED (or "UltraViolet Light-Emitting Diode") Bit sends out a special kind of light. It looks purple to the eye, but it has some special abilities, like making white fabrics and certain inks glow in the dark. If you have a pen that writes in UV-sensitive ink, you can use it to reveal secret messages.

littleBits Vibration Motor $23.59 ex GST

The vibration motor is very similar to the device that makes your cellphone shake when you get a text. With this module, you can make anything vibrate and buzz! This module also includes the vibeSnap-- an accessory that helps you attach stuff - like paper, tin foil, or a pipecleaner - to the motor.

littleBits Wall Storage $590.00 ex GST

littleBits Wall Storage makes organising your giant collection of Bits a breeze. Always know where your Bits belong, and access them quickly and easily with 5 purple littleBits metal wall panels, 60 small plastic bins, and 20 large plastic bins.

littleBits Wheel (Cross axle - 2 pack) $22.68 ex GST

When used with DC motors, this pair of wheels is perfect for making bots, cars, and all sorts of spinning inventions. These wheels work with cross axle DC motors.

littleBits Wire Bit from $17.23 ex GST

The wire Bit is just what it sounds like - it allows you to physically separate your Bits. Try it whenever you need to break up your chain of Bits, like when you need to put a light at the top of a model building! You'll find many situations where you want a wire Bit.

littleBits Wireless Receiver $59.05 ex GST

You will need a wireless receiver and a transmitter to use littleBits wirelessly. You can purchase additional receivers and transmitters. The wireless receiver module receives a signal from your wireless transmitter and activates your littleBits circuit remotely! The three channels (labeled 1, 2, and 3) on the transmitter and receiver correspond to each other and can be used simultaneously. The module can receive a signal at a distance of about 100 feet indoors. Multiple wireless receivers can be used with a single wireless transmitter, but only one wireless transmitter can be used in proximity to another wireless transmitter.

littleBits Wireless Transmitter $59.05 ex GST

You will need a wireless receiver and a transmitter to use littleBits wirelessly. You can purchase additional receivers and transmitters. The wireless transmitter sends a signal to your wireless receiver and activates your littleBits circuit remotely! The three channels (labeled 1, 2, and 3) on the transmitter and receiver correspond to each other and can be used simultaneously. The module can transmit its signal to a distance of about 100 feet indoors. Multiple wireless receivers can be used with a single wireless transmitter, but only one wireless transmitter can be used in proximity to another wireless transmitter.

littleBits XL Mounting Board $31.77 ex GST

The mounting board (8" x 7") serves as the backbone of your inventions. It provides structure, and allows you to keep your circuit intact and move it around with ease. This mounting board can accommodate large circuits.

littleBits XOR $20.86 ex GST

The littleBits XOR module is a logic gate with two inputs. Think of it as “exclusive or,” meaning that it sends an on signal when it’s receiving an on signal exclusively from one input or the other, but not both. The XOR is great for projects in which the activation requires alternation. Because the output is only true when one input is true, this circuit can be used to make sure that only one event happens at a time. The XOR also works well in scenarios in which you want one button to start an action, and the other button to stop it.

Makerspace Invention Wall $9,086.36 ex GST

Our giant collection of nearly every Bit provides limitless options for schools and makerspaces. Access STEAM+ Coding Kit content and hours of inventions and creative builds via littleBits classroom 296 Bits Wall storage for easy Bit organization and access 3 craft packs Grades 3+ Engage 32 students NOTE: This kit is an upgrade of the Pro Library. The previous square LED matrix has been replaced by a round matrix. Some images on this page may still contain the square matrix.

Micro Switches $22.68 ex GST

Micro Switches (Pack of 15)

Purchase Orders Welcome

Schools and Educational Institutions we offer a Purchase Order option at checkout, ensuring a seamless purchasing process.

First-Class Support

We offer exceptional support for our educational products, backed by our firsthand experience as former teachers.

Australian Warehouses

Experience efficient and timely delivery as our store ships directly from our suppliers' warehouses in Australia.

Australian Owned

Shop with confidence knowing that we are proudly Australian owned, delivering quality products with a touch of true Aussie spirit.

Links Search our site Why Sammat? Our Trainers Contact Us Our Brands Privacy Policy Refund Policy Shipping Policy Terms of Service

Online Academy

In order to support our programs and products we have created our Sammat Education Academy. This is our online learning environment for teachers and students to up-skill themselves in STEAM education. Click here to enter.

Join us on Social Media

Find anything you need

Purchase Orders Welcome

First-Class Support

Australian Warehouses

Australian Owned