0.4mm genuine flashforge nozzle - m7 thread for mk10 extruder
0.4mm Genuine FlashForge Nozzle - M7 Thread for MK10 Extruder $13.59 ex GST
This is a genuine nozzle from FlashForge. M7 tread. They have a step and are wider than many of the other nozzles we stock to aid in heat transfer from the heater block Also fits a variety of MK10 extruders. Specifications: Hole- 0.4mm hole Thread - M7, 5mm long Total Length - 13mm Head Width - 9mm Base - Tapered at screw/thread end Tip - Pointed Filament Size - suitable for 1.75mm filament Material - Brass Is is compatible with: FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Flashforge Finder Flashforge Guider, Guider2 - NOTE: FlashForge Guider2S with the high-temp hotend (red duct) has a different nozzle. See ptNozzle04FFAM Dremel Idea Builder PowerSpec 3D Pro PowerSpec 3D X Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Monoprice Maker Select 3D Printer v2 Cocoon Create 3D Printer NOT COMPATIBLE WITH: Old ply wood Flashforge creator (they use a MK8, or 0.4 standard nozzle)Dimensions: 9 x 9 x 13mm
0.4mm nozzle - m7 thread for mk10 extruders - wear resistant twin clad coating
0.4mm Nozzle - M7 Thread for MK10 Extruders - Wear Resistant Twin Clad Coating $27.23 ex GST
This wear resistant nozzle by Micro Swiss suits a range of printers has an M7 thread and 0.4mm hole. It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it an excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Aluminium or Carbon Fibre filament. TwinClad XT is a nickel composite coating for very low friction. Over a 360 brass base, it gives a lower coefficient of friction than PTFE (Teflon) over nickel.This nozzle is used on MK10 extruders. Designed to work with machines with a PTFE tube lined barrel running into the nozzle. ALWAYS run preheat before changing nozzles to avoid stripped threads. Is is compatible with: FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Flashforge Finder Flashforge Guider Dremel Idea Builder PowerSpec 3D Pro PowerSpec 3D X Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Monoprice Maker Select 3D Printer v2 Cocoon Create 3D Printer Specs  Hole - 0.4mm hole.Thread - M7, 5mm LongTotal Length - 13mm.Head width - 9mmBase - Flat at screw/thread endTip - may have a slight flattened areaFilament Size - suitable for 1.75mm filament.Dimensions - 12 x 8 x 8mm
0.6mm nozzle - m7 thread for mk10 extruder - twinclad coating
0.6mm Nozzle - M7 Thread for MK10 Extruder - TwinClad Coating $27.23 ex GST
This wear resistant nozzle by Micro Swiss suits a range of printers with an M7 thread and 0.6mm hole. It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Aluminium or Carbon Fibre filament.TwinClad XT is a nickel composite coating for very low friction. Over a 360 brass base, it gives a lower coefficient of friction than PTFE (Teflon) over nickelThis nozzle is used on MK10 extruders. Designed to work with machines with a PTFE tube lined barrel running into the nozzle ALWAYS run preheat before changing nozzles to avoid stripped threads. Is is compatible with: FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Dremel Idea Builder PowerSpec 3D Pro PowerSpec 3D X Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Monoprice Maker Select 3D Printer v2 Cocoon Create 3D Printer Specifications: Hole - 0.6mm hole.Thread - M7, 4mm long.Total Length - 13mm.Head width - 9mm (for better heat retention)Base - Flat at screw/thread end (click photo under more info page for details).Tip - may have a slight flattened area.Filament Size - suitable for 1.75mm filament.Coating - TwinClad CoatedDimensions - : 13 x 9 x 9mm
ball bearing mf-85-zz 5x8x2.5. fits guider 2 corner belt mounts (set of 4)
Ball Bearing MF-85-zz 5x8x2.5. fits Guider 2 corner belt mounts (set of 4) $14.55 ex GST
Thin, flanged Roller Bearing with metal shields used in Guider 2 (not 2s which uses 105zz) corner belt assembly (with flange but or without) 5x8x2.5mm Flanged Bearings, with Metal Shield.Plaig Bearings are a stronger, more reliable bearing with greater heat resistance and superior life to standard factory bearings. Inner Diameter: 5mmOuter Diameter: 8mmWidth: 2.5mmDimensions: 5x8x2.5
flashforge ad1 - sign lettering 3d printer
FlashForge AD1 - Sign Lettering 3D Printer $7,271.82 ex GST
Part of the FlashForge Professional range, this 3D Printer is designed to be a complete solution for printing Light Channels for Signage The special slicing & designing software, FlashAD, makes it easier to make complex designs, you can even create an amazing shadow effect with returned slant at some angles as you wish, eliminating the trouble of calculating the curving angle in CNC machining. Strongly helps you to fabricate complicated logos easily.NOTE: This machine is designed for commercial use only. It comes on an oversized pallet in a wooden crate. You will have to carefully turn it on its side to get it through a standard doorway. Thankfully the crate is sturdy and the machine is bolted inside. Features- Resume printing after power outage- Filament detetion- Screensaver function- Printed file identification (turns green in file list)Printing- Single Nozzle, 2 filament colours (2in / 1 out)- Build Volume: 600 x 600 x 70mm- Layer Heights 0.2 - 0.4mm- Print Resolution: ± 0.5mm or 0.2%- Print Speed: 10-80mm/s- Nozzle Diameter: 0.6mm - Maximum Nozzle Temperature: 260°C- Heated Build Plate: to 100°C- Leveling: 8 point, manual- Material: A-PLA recommendedMachine- 4.5 Inch Touchscreen- 8Gb Onboard Memory- Power: 220VAC, 47-63Hz, 1500W- Machine Weight: 50.2kg- Machine Size: 1170x975x485mmCommunication- Software: FlashAD - Windows 32bit and 64bit- Data Transmission: USB Drive, Ethernet, FlashCloud. Note: No WiFi.- File Output: GFZ- File Input Types: FAD, STL, NC, CDRDimensions: 1070 x 975 x 485mm
Flashforge Adventurer 5M PRO 3D Printer front view, showcasing its sleek, fully enclosed design. 4.3-inch touchscreen display in use, demonstrating the printer's user-friendly interface.
Flashforge Adventurer 5M PRO 3D Printer $899.00 ex GST
The Flashforge Adventurer 5M PRO is the ultimate 3D printer for both professionals and enthusiasts. Its sleek, fully enclosed design and intermediate-level capabilities make it an ideal choice for those seeking to upgrade or start with a full-featured, cost-effective printer. Key Features High-Speed Printing: Achieve rapid results with a maximum printing speed of 600mm/s and a layer resolution of 0.1-0.4 mm for precise detail. Advanced Filament Compatibility: Supports PLA, ABS, PETG, and more, with a heated bed and enclosed chamber for optimal adhesion and temperature control. Smart Connectivity: Control your printing process via a 4.3-inch touchscreen or remotely with built-in WiFi using the FlashCloud app. Monitor prints in real-time with the built-in camera. Efficient Air Filtration: Dual HEPA and carbon filters ensure a safer, cleaner environment by blocking 99% of particulates and VOCs, perfect for educational settings. Seamless Purchasing We accept purchase orders, catering to educational and government institutions. Enjoy fast shipping from our Australian warehouses and benefit from our exceptional customer support. As a proudly Australian-owned business, we are committed to delivering quality products with true Aussie spirit.
flashforge creator 3 - v2 flashforge creator 3 - v2
FlashForge Creator 3 - v2 $3,635.45 ex GST
The Flashforge Creator 3 Independent Dual Extruder 3D Printer is the latest upgraded version of the world-famous Flashforge Creator Pro. With the new high-temperature extruders and independent dual extruder design, this printer can print with a wide range of materials and handle more challenging print jobs. Version 2 Improvements More ventilation slots on the extruder Optimised nozzle structure Improved nozzle sensitivity Flexible spring sheet platform locked in place with magnets Universal filament holder to fit third party materials Key Features Independent dual extruder (IDEX): the two independent print heads can move separately or mirror print 2 models at the same time. New high-temperature extruder (up to 300℃): enables Creator 3 to print with a wide range of materials including PLA, ABS, PETG, Nylon, PVA and Polycarbonate. Closed metal frame: to maintain an optimal ambient temperature during print. Removable heated print bed: allows the Creator 3 to print demanding materials like ABS or Nylon filaments. Built-in HD camera: to check printing status anytime, anywhere. Filament detection: print stops when filament runs out. Specifications Build Volume: 300mm x 250mm x 200mm Device Size: 647mm x 485mm x 615mm Extruder: Independant Dual Extruder (IDEX) Nozzle Diameter: 0.4mm Positioning Accuracy: X/Y Axis 0.011mm | Z Axis 0.0025mm Layer Height: 0.05mm ~ 0.4mm Maximum Nozzle Temperature: 300 ℃ Maximum Heatbed Temperature: 120 ℃ Net Weight: 40kg Print Technology: Fused Filament Fabrication (FFF) Touch Screen Size: 4.5 inch Color IPS Touch Screen Supported Materials: PLA/ ABS/ TPU/ PVA/ HIPS/ PETG/ WPC/ Nylon Filament Diameter: 1.75mm Connectivity:  USB Stick / WiFi / Ethernet / 3D Cloud Operating System:  Win XP / Vista / 7 / 8 /10 / Mac OS / Linux File Types: Input - 3MF/ STL/ OBJ/ FPP/ BMP/ PNG/ JPG/ JPEGOutput - GX / G AC Input:  100V-240VAC, 47-63Hz Power: 500W Warranty: 12 Months excludes wear and tear parts
flashforge creator pro2 with idex
FlashForge Creator Pro2 with IDEX $1,180.91 ex GST
The Flashforge Creator Pro 2 is the latest upgrade of the Creator Pro. The Creator Pro 2 is equipped with an IDEX (Independent Dual Extruder) system which enables the printer to do mirror prints and also improves the quality of dual-colour or dual-material prints. Key Features Support PLA, Pearl PLA, PVA, ABS, ABS Pro, HIPS Support mirror printing mode, duplicate printing mode, and soluble printing mode Fully enclosed design Touch screen control Metal framework Anti-scrape design to prevent oozing issues Self-developed software FlashPrint Specifications Build Volume: 200 L X 148 W X 150 H mm Layer Resolution: 0.1-0.4 mm Maximum Print Temperature: 240℃ Extruder Quantity: Two Print Speed: 10-100 mm/s
flashforge guider 2-s (v2 - 2020 model)
FlashForge Guider 2-S (v2 - 2020 Model) $2,409.09 ex GST
This 2020 update to a solid large printer adds a flexible bed, toughen filament drive gear, toughened nozzle (included in the spare parts pack and not fitted) and improved filter. It has a user friendly touchscreen and webcam, plus a generous 280 x 250 x 300mm build volume. All machines come standard with high-temperature extruders (to 300deg). 2020 Upgrade includes unfitted items: Magnetic self-adhesive pad, flexible steel plate, 2 sheets of build tape. Nozzle and gear kit with the hardened filament drive gear and 0.4mm nozzle, Brass 0.3, 0.4, 0.6 and 0.8mm nozzles, allen key and nozzle spanner. The Guider 2s follows the tradition of FlashForge printers in offering an affordable, easy-to-use printer. The building volume of 280 x 250 x 300 mm is one of the largest, while the closed chamber keeps the heat in improving performance with ABS, Nylon and other materials. The printer has filament run-out detection and power failure recovery. The Flashprint software offers advanced features including internal and external dimension adjustment allowing accurate part dimensions after printing. Features Innovative Extruder System – completely encased air supply system to elevate printing smoothness Heated Build Plate – supports multiple mainstream filament types for diverse printing needs Touch Screen – Guider IIs is equipped with a 5-inch full-colour touch screen and multilingual user interface. Built-in Air Filter HD Camera to monitor the print any time  Specifications Nozzle Diameter (mm) 0.4 mm Build Volume W x D x H (mm) 280 x 250 x 300 mm Printing Technology FFF Proprietary filament Yes, also compatible with others Filament Diameter (mm) 1.75 mm Material type PLA / ABS / Flexible Heated Bed Yes Build Plate Glass with Buildtak Layer Thickness (microns) 50 - 350 microns Platform Levelling Assisted Connectivity USB, WiFi, Ethernet Slicing Software Flashprint, Slic3r, Cura File Input Format STL, OBJ Power Supply 100-240 V, 50-60 Hz, 500 W Software Compatibility Windows 7, Mac OS X XY Positioning Accuracy 11 microns Warranty 12 months  
flashforge guider 2-s with microswiss hot end
FlashForge Guider 2-S with MicroSwiss Hot End $2,604.55 ex GST
This edition has the Microswiss Upgraded pre fitted and is ready to print materials from PLA through to abrasive materials like carbon fibre. The 2018 update to a solid large printer adds power-out resumption and an air filter to reduce particle emissions to its user friendly touchscreen and webcam, plus a generous 280 x 250 x 300mm build volume. The Guider 2s follows the tradition of FlashForge printers in offering an affordable, easy-to-use printer. The building volume of 280 x 250 x 300 mm is one of the largest, while the closed chamber keeps the heat in improving performance with ABS, Nylon and other materials. The printer has filament run-out detection and power failure recovery. The Flashprint software offers advanced features including internal and external dimension adjustment allowing accurate part dimensions after printing. Features Innovative Extruder System – completely encased air supply system to elevate printing smoothness Heated Build Plate – supports multiple mainstream filament types for diverse printing needs Touch Screen – Guider IIs is equipped with a 5-inch full-colour touch screen and multilingual user interface. Built-in Air Filter HD Camera to monitor the print any time  Specifications Nozzle Diameter (mm) 0.4 mm Build Volume W x D x H (mm) 280 x 250 x 300 mm Printing Technology FFF Proprietary filament Yes, also compatible with others Filament Diameter (mm) 1.75 mm Material type PLA / ABS / Flexible Heated Bed Yes Build Plate Glass with Buildtak Layer Thickness (microns) 50 - 350 microns Platform Levelling Assisted Connectivity USB, WiFi, Ethernet Slicing Software Flashprint, Slic3r, Cura File Input Format STL, OBJ Power Supply 100-240 V, 50-60 Hz, 500 W Software Compatibility Windows 7, Mac OS X XY Positioning Accuracy 11 microns Warranty 12 months
flashforge hunter - resin printer
FlashForge Hunter - Resin Printer $4,636.36 ex GST
This high quality resin printer is designed for applications where very high resolution is essential, such as jewelry and dentistry. Build size is 120 x 67.5 x 150mm Print Technology: DLP 5 inch Touchscreen Build Size: 120 x 67.5 x 150mm Print Precision: ± 0.05mm Pixel Size X, Y: 0.0625mm (62.5microns) Light Source: 405nm LED, FHD 1080p resolution with 50,000 hours lifespan Layer Thickness: 0.05 / 0.025 / 0.0125mm (50 / 25 / 12.5 microns) Speed: 10mm/h (vertical) Vat Type: Aluminium with replaceable FEP film Processor Type: Dual-core 800MHz ARM Machine Size: 360 x 310 x 565mm Machine Weight: 17.8kg Power Input: 100-240V, 50-60Hz, 1A Connection: USB Flash Drive, USB Cable or WiFi Software: FlashPrint. Free download for Win XP-10, Mac OS, Linux File Input Format: .stl Dimensions: 360 x 310 x 565mmFormat: 3D Printer
flashforge inventor 1
FlashForge Inventor 1 $1,436.36 ex GST
This 2017 upgrade to the trusty Dreamer adds an onboard camera and greater build height to the twin extruder, heated bed and fully enclosed features. Onboard Webcam Build size of 230 x 150 x 160mm (W x D x H) + Twin Extruder Heated bed (so prints most common FDM materials, PLA, ABS and much more) 3.5 Inch Touchscreen for ease of operation Fully enclosed with temperature sensor and extraction fans to keep your printing chamber at a consistent temperature WiFi for peer-to-peer or network connection Pause and Auto Restart feature allows the printer to continue if power is cut mid-print without starting over again Layer Height: 0.05-0.4mm, 50-400 microns Print Accuracy: +-0.1mm Positioning Accuracy: Z: 0.0025mm, X & Y 0.011mm Filament Diameter: 1.75mm Nozzle Diameter: 0.4mm Printing Speed: 30-200mm/s AC Input: 100-240VAC, 2.5-4.5Amps Machine Weight: 10.7kg Connectivity: USB Cable, USB Stick, WiFi FlashPrint Software (free on SD card or by download) Supported File Formats: 3MF/STL/OBJ/FPP/BMP/PNG/JPG/JPEG; GX/G Operating Systems: Win XP/Vista/7/8/10, Mac OS, Linux In The Box Dimensions: 485x400x335mmFormat: Machine
flashforge inventor 2 - bilby 3d special edition
FlashForge Inventor 2 - Bilby 3D Special Edition $1,245.00 ex GST
This is a special Edition of the FlashForge Inventor 2 is the product of a collaboration between Bilby 3D, Flashforge, and Microswiss that upgrades the Inventor 2 to meet the demands of the Education environment, with significantly decreased maintenance requirement and easy use. In addition it is ready for almost any material straight out of the box including Metal filaments. The Inventor II- Special Edition - Smart, Reliable and Safe Desktop 3D Printer designed specifically for educational use and low maintenance This machine is a very special collaborative Edition that unites the expertise of Bilby 3D, Flashforge and Microswiss to provide an edition of the Inventor 2s (which has been our most popular educational model for good reason) to even better cater for the Australian Education sector and small business demands. About this collaboration  Bilby 3D, born from Bilby Publishing, brings over 20 years experience in the education sector to this project; together with the wish lists of many education department and Australian businesses. Drawing on this experience, and long standing relationships with FlashForge and Microswiss, Bilby 3D was able to unit the three companies in a single project -the Inventor 2 SE. This machine includes all the Australian safety and compliance items, and raises the bar well above any other machine on the market to include features like Hepa and Carbon filtration to deal with not just micro particles, but also VOC emissions for a completely safe environment. It also has rapid cooling if the door is open to make child burns almost impossible. With the help of Microswiss this machine also incorporates a tough and near maintenance free 3D printer extruder system ready to print even the most abrasive materials like stainless steel. Designed for Tough Materials     The machine comes with the amazing Micro-Swiss hot end that can handle abrasive materials as strong as Steel and Carbon Fibre as though they PLA; giving you the power to produce amazingly high quality plastic parts; flexible runners, and even Brass, Bronze, Copper, Steel and Carbon-fibre parts straight out of the box. Tested on the entire Proto-pasta metal and blended material range and designed specifically to handle them all, this little machine holds a lot of power under its hood. Designed for Low Maintenance     Maintenance is unaffordable down time in any workplace or school, so we designed this machine to be tough, and need nearly no maintenance at all. Tough Nozzle: The extruder upgrade also means that your are getting a Tough Coat nozzle precision machined by Micro-Swiss that testing has proven to last more than a year in the average school. Silicon coated Heater Block: Say good bye to ever having to change the ceramic tape again. Sturdy Bed System: Means once set up you near never need worry about levelling or adjustments Slide out Glass bed with Flexi steel top and strong print tape: The tough glass bed is fully encased to there is no risk of it breaking. the casing slides out like a drawer, making print removal safe and easy. In addition that glass has a strong magnetic coating with a flexible steel plate on top, that snaps on and off and is flexible, bending to pop prints off the bed. In Combination tape will receive less accidental damage from print removal, and be more long wearing. Just soapy water to wash it occasionally and you are off and printing for up to 300 prints per sheet of tape. Add extra beds to the package so that you can start the next print before removing the last. Designed for Safety and Monitoring     Camera monitoring: We also added a Camera for monitoring the machine remotely- great for teachers on the run. It is also Polar 3D enabled, so you can control a lab of machines via cloud management with ease (Note - Polar 3D requires a seperate subscription fee) Filament Monitoring: Sensor auto detects and pauses prints if filament runs out OHS Safety: Door Windows and Hood: All new additions in this model; and combine to completely enclose and finger-proof this machine. The door also has has a sensor that can pause prints & instantly cool the nozzle (turn this on or off in the LCD menu) Full surround nozzle with rapid cooling: The nozzle has a full surround making it almost impossible to get burnt. The door pause feature also activates nozzle cooling, lowers bed and sets hot end to back of machine - to further reduce risk of burning to inquisitive fingers. Designed for Practicality and Quality     Soooooooooo Quiet!We measure it at about 22dB. To put that in perspective the Makerbot is 62dB. Making it much more practical for a classroom or office. Especially when you are running a bank of machines at once. Professional ResolutionThis machines print quality is astounding, with very fine detail and quality at up to 50 micron resolution. It is not as incredible at overhangs as the Guider 2, but still far superior to its rivals. Connection and CommunicationLarge colour LCD touch screen makes communication simple, with print thumbnails in the menu, which is lovely. You can print files via: USB drive USB cable to your PC (Mac, Win or Linux) WiFi Basic stats 150 x 140 x 140 mm build size Single High Quality Extruder FlashPrint Slicer Software All Flashforge printers use FlashPrint as their slicer; an amazing piece of software that lets you do things no one else can; and it is free with all Flashforge machines. You can use Simplify 3D, but we would recommend you the FlashPrint software that comes with the machine. It is far superior to any other slice we have used and here are a few reasons: Tree Support (All Flashforge printers can do this) If you are not familiar with tree support it is an amazing step forward in support material. It is automatically generated and allow you to print much more complex models, snapping off supports easily by hand without damaging your objects. If you have a dual extruder you can print support with the second extruder if you want. 2D to 3D - make models instantly from images The 2D into 3D featured in FlashPrint allows you to convert 2D image files into 3D models. This is one of the easiest ways to start 3D designing. All you need to do is to drag image and select parameters you want. Crop on the Fly Cut and split big models into parts or make the base of a model flat. You can cut on an axis or a mouse drawn angle. Advanced Features inc. Dimensional Accuracy Adjustment The FlashPrint software has a basic and expert mode. In expert mode you can control almost every variable and make dimensional adjustments, especially handy when using high shrinkage filaments. . Specifications WHATS IN THE BOX?600g PLA Filament (white),Print Tape and flexible Steel plate (already fitted),AU Power Supply and Cable,USB Cable,Tools: Allen Keys, Small screw driver, sachet of lubricant for rods, a nozzle clearing tool.BED SPECIFICATIONSBuild size: 150 x 140 x 140mmHeated Bed: NOSlide out/Removable: YesBed surface: Glass with Magnetic surfaceBuild plate: Flexi steel coated in Flashforge tape (a consumable)Levelling: Assisted - sensors ring a tone to help with bed leveling through screw adjustments. PRINT QUALITYExtruders: SingleResolution/Layer Height: 50-500micronsPosition Precision: (XY)11 microns, (Z)2.5MicronsSupport: Automatic and custom. Tree or LinearNozzle: 0.4mm Comes with a MicroSwiss Tough Coat hard wearing nozzleFILAMENTDiameter: 1.75mmMaterial: PLA, Bilby 3D Wood, Bilby 3D Flex, Bilby 3D Copper.....the list goes on. Can print heavy metals and abrasive filaments, and Flexibles with easeFilament run-out detection: Yes, when using the spool drawer. Can also run larger spools on external spool stand.INTERACTIONInterface: Touch ScreenConnectivity: 2.4 Ghz WIFI, USB stick, USB cableSoftware: FlashprintFile Type: STL,OBJOperating System: Windows 7/8/Vista; Mac OS X, LinuxPHYSICAL SIZEMachine Size: 420 x 440 x 430mmWeight: 20kgShipping Size (Box): 500 Sq mm, 28kgAC Input: 115-230V, 50-60 Hz, 150wDimensions: 420x440x430mm (570mm with hood)Format: Machine
flashforge uv curing cabinet
FlashForge UV Curing Cabinet $999.00 ex GST
Harden your resin prints with this UV Curing cabinet by FlashForge With a Curing Chamber volume of 203mm diameter, 139mm high, this is big enough for the prints from many SLA and DLP printers up to 500g. You can monitor and set the curing temperature from 35-60°C, with a fan to circulate the air and ensure an even temperature during curing. You can set the curing time from 0-300minutes, with normal or strong light exposure.It beeps on completion of the curing cycle, with cut-outs if the door is opened UV Wavelength: 405nm Curing Volume: 203mm diameter, 139mm high. Overall dimensions: 399x266x225mm Net Weight:L 9.9kg Power Input: 100-240V AC, 4.5-2A Rotational Speed: 2.5rpm Power: 326W Dimensions: 399x266x225mm
inventor / creatorpro blue print bed tape, 23x15cm
Inventor / CreatorPro Blue Print Bed Tape, 23x15cm $8.18 ex GST
This is a genuine FlashForge replacement sheet for the FlashForge Dreamer, Inventor1, Creator Pro 2016 (v5) and Creator Pro2 (IDEX) printing bed. It is very similar to BuildTak but with more texture on the surface Size: 232 x 154mm It has an adhesive layer with backing sheet (0.7mm total thickness with backing)Tip: When removing the old tape, the glue is very aggressive. We recommend pre-heating to 80-100°C Peel off the old tape and use it (glue side down) to wipe off any remaining glue. Allow to cool before fitting new sheet This tape suits: Dreamer Creator Pro Inventor (1) Creator Pro 2
inventor 2se - 6 month maintenance kit
Inventor 2SE - 6 Month Maintenance Kit $40.91 ex GST
Contains the common consumables and tools you need after 6 months to keep your FlashForge Inventor 2S/SE in top working order. Individually these items are valued over $75.35. Save over 40% by buying these commonly used maintenance items together. Kit Contents: 2 x Build Platform Tape already mounted on flex plates Super Lube for lubricating the Z-Leadscrew and all rods Double Ended mini-brush: For cleaning your filament drive gear, use the bottle brush end and run filament load to clean without dis-assembly Set of 3 brushes: Steel brush to clean your nozzle, other brushes to clean out the recesses of your printers body Silicon Heater Block Cover: These are frequently damaged during print fails or servicing Bottle of 3D Lac: To keep your prints sticking to the bed when tape is damaged or worn Bilby3D Maintenance Instruction Sheet Dimensions: 32 x 22 x 6cm
roadcase for the inventor 2/se or finder
Roadcase for the Inventor 2/SE or Finder $908.18 ex GST
This flight ready, rugged road case is designed to neatly store your Flashforge Finder, Inventor 2 or Special Edition 3D Printer, with a rear storage section for Filament, spare parts and power supply. It is on lockable casters for easy moving. Main section holds your machine safe with slots in the padding so you can lift it out by the side handles on the machine with minimum effort. The rear storage section has space for 4 spools of filament, toolbox, spare parts and power supply. This quality roadcase is on lockable casters for easy moving and the machine can be safely operated on top of the closed lid.Internal Size 43 wide, 45 deep, 44cm TallRear storage area 15 cm deepExternal Size 709 wide, 558 deep, 663cm (including casters) TallRear storage area 15 cm deepCasters: Locakble 80mm heavy dutyHinged LidHigh density foam linedWith printer + filament and a tool kit this case weights 45KgDimensions: Internal 43x45x44cm with 15cm rear compartment
roller spool stand - 140mm wide
Roller Spool Stand - 140mm wide $25.45 ex GST
Bilby 3D designed and 3D printed spool stand for 114mm wide spools. Our 2020 design is bigger and stronger. It accommodates our 3kg spools, but will also carry our 1kg and 600g spools. This is the roller stand only. If you need to use a feeder tube, maybe the filament path goes around corners or could get snagged, please purchase the correct length separately. Dimensions: 195 x 150 x 55mm
tool kit for flashforge 3d printers
Tool kit for Flashforge 3D Printers $85.00 ex GST
Your tool kit comes in a clip lock container with the following tools, plus a laminated card explaining the use of each item: Buildtak Spatula - for the easy removal of prints from your bed Nozzle clearing tool - to help clear minor blockages of your nozzle 100mm Calipers - to measure nozzle output and test for under extrusion 9mm L-Spanner - to assist with nozzle changes Side cutters - to cleanly cut filament before loading it Tweezers - to help grab filament when things go wrong Pliers - to assist with repairs *Feeder Clearing tool *Allen keys (2.75mm and 2mm) *Phillips head screw driver in SE and Guider models to remove top extruder cover and filament nozzle duct for maintenance There is sufficient room to also store your Inventor 2 SE power supply and cable, plus your machines USB cable and USB finger; plus the small set of repair tools and maintenance items that come with your machine from flashforge (marked with a * above). Dimensions: 230 x 160 x 85mm

Purchase Orders Welcome

Schools and Educational Institutions we offer a Purchase Order option at checkout, ensuring a seamless purchasing process.

First-Class Support

We offer exceptional support for our educational products, backed by our firsthand experience as former teachers.

Australian Warehouses

Experience efficient and timely delivery as our store ships directly from our suppliers' warehouses in Australia.

Australian Owned

Shop with confidence knowing that we are proudly Australian owned, delivering quality products with a touch of true Aussie spirit.
Afterpay American Express Apple Pay Diners Club Google Pay Mastercard PayPal Shop Pay Visa